Table of Contents
Advertisement
No.
Item
(9)
[FTP access]
Default: Forbid
Allow
Forbid
(10) [Total bit rate]
Default: Unlimited
.........................................................................................................................................................................
Note
• For further information about the address settings of each server, consult the network administrator.
• The following addresses are unavailable for the IP addresses and default gateway addresses even when
using the DHCP function.
• 0.*.*.*
• *.*.*.0
• 255.*.*.*
• *.*.*.255
• 127.0.0.1
• Class D addresses (224.0.0.0 to 239.255.255.255)
• Class E addresses (240.0.0.0 to 255.255.255.255)
..............................................................................................................................................................................
Select "Allow" or "Forbid" to determine whether to allow or forbid camera
access from an FTP client.
Accessing of the camera from FTP client is allowed.
Accessing of the camera from FTP client is forbidden.
Select the total bit rate from the following.
Unlimited/64 kbps/128 kbps/256 kbps/512 kbps/1024 kbps/2048 kbps/
4096 kbps/
................................................................................................................
Note
• To carry out live transmission of JPEG images and FTP periodic
transmission simultaneously, select a bit rate of "128 kbps" or faster.
• When the transmission amount has been lowered, it is possible that
the one-shot function may not operate depending on the
environment. In this case, configure the JPEG setting for "Capture
size" to QVGA or lower the "Image quality."
.....................................................................................................................
54
Description
(2/2)
Advertisement
Table of Contents
