Table of Contents
Advertisement
Setting camera titles and camera
operations [Cam Function]
Click the [Cam Function] tab on the "Camera setup" page.
The settings relating to camera title and camera operation can be configured on the "Camera setup" page.
(1)
(2)
(3)
(4)
No.
Item
(1)
[Camera title on screen]
Default: OFF
ON
OFF
(2)
[Camera title on screen
(0-9, A-Z)]
Default: None (blank)
(3)
[Upside-down]
Default: OFF
ON
OFF
(4)
[Stabilizer]
Default: OFF
ON
OFF
Select whether or not to display the camera title set here on images.
The camera title set on [Camera title on screen] will be displayed at the
position selected for [Time & date setup]. (→ page 9).
The camera title is not displayed on images.
Enter the camera title to be displayed on images.
Number of characters for the camera title: 0 to 16
Available characters: 0 to 9, A to Z, and the following symbols:
("#$%&'()*+,-./:;=? ; = ?)
Select whether not to display images upside-down on screen.
Images are displayed upside-down.
Images are not displayed upside-down.
Select whether or not to use the camera's stabilizer function. This function
is effective, for example, when the camera is installed on a utility pole.
Important
• When "ON" is selected for this function, the view angle becomes
narrower and the image capture size is reduced. When installing the
camera with this function set to "ON", adjust the view angle and
image capture size.
(→ Operating Instructions)
The stabilizer may not be effective for the following subjects:
• Objects in low lighting
• Non-contrast objects (white walls etc)
• Fast moving periodic action, such as mechanical vibration
• Large-scale amplitude vibrations
Vibration is reduced.
Vibration is not reduced.
20
Description
Advertisement
Table of Contents
