Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Panasonic WV-NW502SE
Summary of Contents for Panasonic WV-NW502SE
-
Page 1: Installation Guide
Installation Guide Network Camera WV-NW502SE Model No. Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. The model number is abbreviated in some descriptions in this manual. - Page 2 WARNING: • To prevent fire or electric shock hazard, do not expose this apparatus to rain or moisture. • The apparatus should not be exposed to drip- ping or splashing and that no objects filled with liquids, such as vases, should be placed on the apparatus.
-
Page 3: Table Of Contents
Contents Important safety instructions ...................... 4 Limitation of liability ........................5 Disclaimer of warranty ........................ 5 Preface ............................6 Main functions ..........................6 About the user manuals ......................7 System requirements for a PC ....................7 Trademarks and registered trademarks ..................8 About copyright and licence ....................... -
Page 4: Important Safety Instructions
Important safety instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Clean only with dry cloth. 6) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 7) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. -
Page 5: Limitation Of Liability
IMPROVEMENTS OF THIS PUBLICATION AND/OR THE CORRESPONDING PRODUCT (S). Disclaimer of warranty IN NO EVENT SHALL Panasonic Corporation BE LIABLE TO ANY PARTY OR ANY PERSON, EXCEPT FOR REPLACEMENT OR REASONABLE MAINTENANCE OF THE PRODUCT, FOR THE CASES, INCLUDING BUT NOT LIMITED TO BELOW:... -
Page 6: Preface
Preface Panasonic WV-NW502SE is designed to operate using a PC on a network (10BASE- T/100BASE-TX), and can be installed under eaves (sheltered outdoor). By connecting to a network (LAN) or the Internet, images and audio from the camera can be monitored on a PC via a network. -
Page 7: About The User Manuals
SDHC/SD memory card function Images can be recorded on an optional SDHC/SD memory card* both automatically (when images fail to transmit using the FTP periodic transmission function) and manually. The image on the SDHC/SD memory card can be playback on a web browser or downloaded via network. -
Page 8: Trademarks And Registered Trademarks
Important: • When using a PC that does not meet the above requirements, displaying of images may become slower or the web browser may become inoperable. • Audio may not be heard if a sound card is not installed on a PC. Audio may be interrupted depending on the network environment. -
Page 9: Network Security
Network security As you will use this unit connected to a network, your attention is called to the following security risks. q Leakage or theft of information through this unit w Use of this unit for illegal operations by persons with malicious intent e Interference with or stoppage of this unit by persons with malicious intent It is your responsibility to take precautions such as those described below to protect yourself against the above network security risks. -
Page 10: Precautions
Precautions Refer installation work to the dealer. Avoid installing this bracket in the loca- Installation work requires technique and tions where salt damage occurs or corro- experiences. Failure to observe this may sive gas is produced. cause fire, electric shock, injury, or damage Otherwise, the mounting portions will deterio- to the product. -
Page 11: Precautions For Use
Turn the power off when cleaning of this repair, extreme care should be required for product. data handling. Failure to observe this may cause injury. Cleaning this product body Be sure to turn off the power before cleaning. [Precautions for use] Failure to observe this may cause injury. -
Page 12: Code Label
• Use of recommended SDHC/SD memory AVC Patent Portfolio License card is suggested. ( page 40) If anoth- THIS PRODUCT IS LICENSED UNDER THE er SDHC/SD memory card is used, the AVC PATENT PORTFOLIO LICENSE FOR camera may not work properly or per- THE PERSONAL USE OF A CONSUMER OR formance deterioration may be caused. -
Page 13: Precautions For Installation
Precautions for Installation Before start the installation/connection, • Locations subject to vibrations (This prepare the required devices and cables. product is not designed for on-vehicle Before starting the connection, turn the use.) power of the devices including this product • If a ceiling board is too weak to support and the PC off. - Page 14 Procure fixing screws separately. Time & date setting The screws that secure this product are not It is necessary to set the time and date supplied. Prepare them according to the before putting this product into operation. material and strength of the area where the Refer to the Operating Instructions (PDF) on product is to be installed.
-
Page 15: Major Operating Controls And Their Functions
Major operating controls and their functions Camera attachment (accessory) Enclosure Mount bracket (accessory) Inner dome Base cover (accessory) Focus lock knob Lens Focus adjustment grip Zoom lock knob Tilt adjusting table Network cable RJ-45 (female) Alarm input/output cable Power cable (12 V DC) Mic/line input cable (white) Audio output cable (black) - Page 16 Panning lock screw Tilting lock screw Panning table SDHC/SD memory card slot MONITOR INITIAL LINK ACT SD CARD/ Camera fixing screw Monitor out connector for adjustment INITIAL SET button Auto-back-focus MONITOR button INITIAL LINK ACT SD CARD/ Link LED SDHC/SD memory card error LED/ABF LED (Lights when the connection (Blinks when ABF is being performed) is being established)
-
Page 17: Preparations
Preparations When installing the camera on a wall or a ceiling, there are two methods as specified below. ( pages 18 - 20) • Using a two-gang junction box • Using supplied mount bracket Important: • Procure 4 screws (M4) to secure the camera attachment (accessory) or the camera mount bracket (accessory) to a wall or a ceiling according to the material of the installation area. -
Page 18: Using A Two-Gang Junction Box
Using a two-gang junction box • Secure the camera attachment (accessory) to the two-gang junction box (4" x 4") built in a wall or ceiling. [Mounting hole pattern] 46 mm {1-13/16"} Two-gang junction box 83.5 mm {3-9/16"} Camera attachment (accessory) Note: •... - Page 19 Using supplied mount bracket • If the mount bracket (accessory) is used to mount the camera, mount the bracket on the wall or ceiling first (see the blow). Mount the camera attachment (accessory) with the supplied screws next ( page 20). (Recommended tightening torque: 0.78 N·m ) Note: •...
- Page 20 Note: • Only the same type of holes, A or B, shall be used for mounting. Pass the cables through the hole for cable running from the wall or ceiling. Fix the camera attachment on the mount bracket using the screws supplied with the bracket.
-
Page 21: Camera Installation
Camera installation Mount the camera. <Using a junction box> q Connect each cable. ( page 28) Waterproof the connecting portion. ( page 31.) w Align the "OPEN" on the camera with the protrusion of the camera attachment. e Engage the camera attachment fixing screws on the rear of the camera in the camera mounting holes of the camera attachment and rotate the camera in the arrow direction to secure the camera attachment and camera. - Page 22 Projection Important: • When mounting the camera body, cables shall be run between the camera attach- ment and camera mount bracket as indi- cated by the arrow in the illustration. * Cable running as indicated by the arrow is an example. Cable running shall be varied with installation environment.
- Page 23 r Accommodate the connected cables inside the cable guide of the camera mount bracket. Important: • To prevent the cables from being caught when the cover is attached, keep the cables inside the cable guide. Cable guide Connected cable Cable guide t Attach the base cover.
- Page 24 Remove the enclosure and inner dome from the main body by loos- ening the three fixing screws. Loosen the three fixing screws by using the provided bit for tamperproof screw. Detach the inner dome while pushing the parts with the "PUSH" indication. Press the parts with the "PUSH"...
- Page 25 Insert an SDHC/SD memory card. Important: • Before inserting an SDHC/SD memory card, turn off the power of the camera first. Insert an SDHC/SD memory card with the label face visible (see the illustration below). Before removing the SDHC/SD memory card, select "Not use" for "SD memory card" on the [SD memory card] tab of "Basic"...
-
Page 26: Adjust The Camera
Adjust the camera Be sure to view the monitor for adjust- 75 ° ment when the camera angle is adjust- Monitor out connector Connect an adjusting monitor (such as a for adjustment Tilt adjusting table small LCD monitor) to the monitor out connector (for adjustment) and adjust the camera angle. - Page 27 Note: • Lens adjustment without setting ABF to the standard position may lead to darkened four corners of the screen. • When either of the zoom or the focus is changed, the other will also be changed. • Refer to the description about ABF for focus fine adjustment. Press the auto back focus button.
-
Page 28: Connection
Important: • Securely tighten all the fixing screws (x3) of enclosure. Otherwise, water exposure may cause damage or malfunction of camera, or camera drop- ping may result in injury. (Recommended tightening torque: 0.78 N·m) • Attach the inner dome in accordance with the lens direction to not to change the lens direc- tion. - Page 29 Connect an external amplifier-embedded speaker to the audio output connector (for use of the audio transmission function). Connect a stereo mini plug (ø3.5 mm) (monaural output). • Recommended cable length: 10 m or less Connect the alarm input/output cable. Rating of ALARM IN/OUT <Ratings>...
- Page 30 Connect a LAN cable (category 5 or better) to the network cable. Connect the power cable. Important: • The power supply of 12 V DC shall be insulated against 230 V AC. • When using 12 V DC power supply Connect the output cable of the AC adapter (option) to the 2P power cable.
- Page 31 Waterproof treatment for the cable joint sections Adequate waterproof treatment is required for the cables when installing the camera with cables exposed or installing it under the eaves. The camera body is waterproof, but the cable ends are not waterproof. Be sure to use the supplied butyl rubber tape at the points where the cables are connected to apply waterproof treatment in the following procedure.
- Page 32 Important: • If open wiring is conducted, be sure to use conduits and run the cables inside the tubes to protect the cables from direct sunlight. • When connecting the conduit at the lateral or bottom position, any of the arrow marks on the bracket shall be at the top.
- Page 33 Connection example when connecting to a network using a PoE hub Video monitor (for adjustment use only) Speaker with amplifier (option) PoE device (hub) LAN cable (category 5 or better, straight, STP) Microphone (option) LAN cable (category 5 or better, straight, STP) Speaker with amplifier (option)
-
Page 34: Configure The Network Settings
When using multiple cameras, it is necessary to configure the network settings of each camera independently. If the Panasonic IP setting software does not work, configure the network settings of the camera and the PC individually on the "Network setup" page of the setup menu. Refer to the Operating Instructions (PDF) for further information. - Page 35 Start the Panasonic IP setting software. Click the [IP setting] button after selecting the MAC address/IP address of the camera to be configured. Note: • When using a DHCP server, the IP address assigned to the camera can be displayed by clicking the [Refresh] button of the IP setting software.
-
Page 36: Troubleshooting
Troubleshooting Before asking for repairs, check the symptoms with the following table. Contact your dealer if a problem cannot be solved even after checking and trying the solution in the table or a problem is not described below. Reference Cause/solution Symptom pages When using DC power supply... -
Page 37: Specifications
Specifications G Basic Power source: 12 V DC, PoE (IEEE802.3af compliant) Power consumption: 12 V DC: 630 mA, PoE: 7.6 W (Class 0 device) Ambient operating temperature: –30 °C to +50 °C * Ambient operating humidity: Less than 90 % Waterproof: Camera: IP66 (IEC60529) * Only when installation work specified in this book is properly... - Page 38 Color: 0.12 lx , BW: 0.01 lx * Converted value (F1.2, Auto slow shutter: Max. 16/30 s, AGC: High) Super-Dynamic: On/Off (only at 1.3 megapixels mode) Dynamic range: 52 dB typ. (Super-Dynamic: On, Light control: Indoor scene) Gain (AGC): On(Low)/ On(Mid)/ On(High)/ Off Adaptive black stretch: On/Off (only at Super-Dynamic Off) Light control mode setting:...
- Page 39 JPEG [4:3]: 1 280 x 960/ SVGA (800 x 600)/ VGA (640 x 480)/ QVGA(320 x 240), max. 30 fps [16:9]: 1 280 x 720/ 640 x 360/ 320 x 180, max. 30 fps 3 megapixel mode H.264 [4:3]: 1 280 x 960/ VGA (640 x 480)/ QVGA (320 x 240), max.
- Page 40 Up to 16 camera images can be displayed simultaneously on a multi-screen. Compatible SDHC/SD memory card (option): Manufactured by Panasonic SDHC memory card: 4 GB, 8 GB, 16 GB, 32 GB SD memory card: 64 MB, 128 MB, 256 MB, 512 MB, 1 GB, 2 GB (except miniSD card and microSD card) *1 When the camera is installed and operated in low temperatures below –10 °C, normal...
-
Page 41: Standard Accessories
Standard accessories Installation Guide (this book)........1 volume CD-ROM* ..............1 pc. Code label* ............... 1 pc. The following parts are used during installation procedures. 4P alarm cable ............1 pc. Camera attachment............ 1 pc. 2P power cable ............1 pc. Fixing screws (M4 x 8 mm) ........ - Page 43 Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC.
- Page 44 Importer's name and address to follow EU rules: Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg F.R.Germany © Panasonic System Networks Co., Ltd. 2010 N0709-3031 3TR005934DZB Printed in China...