Configure The Authentication Settings [Authentication]; Setting User Authentication [User] - Panasonic i-PRO WV-NW484SE Setup Manual

Configure the Authentication Settings [Authentication]

Settings relating to authentication, such as user and PC (IP address) restrictions for accessing the camera
from a PC can be configured on the "Authentication setup" page.
The "Authentication setup" page has two tabs: the [User] tab and the [Host] tab.

Setting user authentication [User]

Click the [User] tab on the "Authentication setup" page.
The settings relating to user authentication for restricting access to the camera from a PC can be configured
on the "Authentication setup" page.
Up to 16 users can be registered.
.........................................................................................................................................................................
Note
• This camera can no longer be accessed if user authentication fails (authentication error) from a PC with
the same IP address for 8 times or more in 30 seconds. Wait for a while before retrying to access the
camera.
..............................................................................................................................................................................
(1)
(2)
(3)
(4)
(5)
No. Item
(1) [User authentication]
Default: OFF
ON
OFF
(2) [User name]
(3) [Password]/[Retype
password]
Select whether or not to authenticate the users.
Users are authenticated.
Users are not authenticated.
Enter a user name.
Number of characters for the user name: 1 to 32
Enter the password.
Number of characters for the password: 4 to 32
................................................................................................................
Note
• When a user name already in use is entered and the [SET] button is
clicked, the relevant user information will be overwritten.
.....................................................................................................................
46
Description
(1/2)