Panasonic WV-NW960 Installation Manual
Network camera
Hide thumbs
Also See for WV-NW960:
- Serivce manual (28 pages) ,
- Specifications (2 pages) ,
- Setup instructions (77 pages)
Related Manuals for Panasonic WV-NW960
Summary of Contents for Panasonic WV-NW960
-
Page 1: Network Camera
Network camera Installation Guide WV-NW960 Model Nos. WV-NW964 Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. - Page 2 We declare under our sole responsibility that the product to Wij verklaren als enige aansprakelijke, dat het product waarop which this declaration relates is in conformity with the stan- deze verklaring betrekking heeft, voldoet aan de volgende dards or other normative documents following the provisions of normen of andere normatieve documenten, overeenkomstig de Directives 2006/95/EC and 2004/108/EC.
-
Page 3: Important Safety Instructions
Important safety instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Clean only with dry cloth. 6) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 7) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. -
Page 4: Limitation Of Liability
Limitation of liability THIS PUBLICATION IS PROVIDED "AS IS" WITHOUT THIS PUBLICATION COULD INCLUDE TECHNICAL WARRANTY OF ANY KIND, EITHER EXPRESS OR INACCURACIES OR TYPOGRAPHICAL ERRORS. IMPLIED, INCLUDING BUT NOT LIMITED TO, THE CHANGES ARE ADDED TO THE INFORMATION IMPLIED WARRANTIES OF MERCHANTABILITY, FIT- HEREIN, AT ANY TIME, FOR THE IMPROVEMENTS NESS FOR ANY PARTICULAR PURPOSE, OR NON- OF THIS PUBLICATION AND/OR THE CORRE-... -
Page 5: Preface
Preface The network camera WV-NW960/NW964 is designed to operate using a PC on a network (10BASE-T/100BASE-TX). By connecting to a network (LAN) or the Internet, images and audio from the camera can be monitored on a PC via a network. - Page 6 Note: Compatible mini SD memory card Performance with this camera has been checked by using Panasonic’s mini SD memory cards (64 MB, 128 MB, 256 MB, 512 MB, 1 GB, and 2 GB). SD High Capacity (SDHC) card is not compatible...
-
Page 7: About These Operating Instructions
About these operating instructions There are 3 sets of operating instructions for the WV-NW960/NW964 as follows. • Installation guide (book, these operating instructions) • Operating instructions (PDF) • Setup instructions (PDF) The "Installation Guide" contains descriptions of how to install and connect this camera, and of how to perform the required network settings. -
Page 8: Trademarks And Registered Trademarks
Trademarks and registered trademarks • Microsoft, Windows, Windows Vista, Internet • Mini SD logo is a trademark. Explorer, and DirectX are either registered trade- • Other names of companies and products con- marks or trademarks of Microsoft Corporation in the tained in these operating instructions may be United States and other countries. -
Page 9: Table Of Contents
Initialize the camera ............................... 24 Configure the network settings ............................25 Install the software ............................... 25 Configure the network settings of the camera using the Panasonic IP setting software ..........25 Troubleshooting ................................27 Specifications ................................. 29 Standard accessories ..............................31... -
Page 10: Precautions
Precautions When the camera has an internal thermal problem Do not aim the camera at strong light sources. during operation, the indication "OVER HEAT" will A light source such as a spot light causes a blooming be displayed. (light bleeding) or a smear (vertical lines). In this case, turn of the power of the camera immediate- ly, and then contact your dealer. - Page 11 About the self-diagnosis function When the camera malfunctions due to exogenous noise, etc. for 30 seconds or more, the camera will automatically reset and will return to normal state. When the camera is reset, initialization will be carried out as when the power of the camera is turned on.
-
Page 12: Major Operating Controls And Their Functions
Major operating controls and their functions Power cable for WV-NW964 Black To an outlet (24 V AC, 50Hz) White Power cable for WV-NW960 External I/O cable Microphone input cable (connector: white) Audio output cable (connector: black) RJ45 conversion connector (provided) -
Page 13: Precautions For Installation
Precautions for installation All work related to the installation of this product • Locations where the temperature is not between –40 °C - +50 °C {–40 °F - 122 °F}. should be made by qualified service personnel or system installers. •... - Page 14 (PDF) for how to format a they snap in place. mini SD memory card. • It is recommended to use Panasonic’s mini SD Wire memory cards ( page 6) since they have tested and confirmed full compatibility with this product. If...
-
Page 15: Installations/Connections
Installations/connections Precautions • Make sure that the place you are installing the camera is strong enough to support it. If it is not strong enough, then the camera may fall and hurt someone. • The following steps of installation and connection work should be done by qualified service personnel or sys- tem installers and should conform to all local codes. - Page 16 3. Mounting the Bracket 4. Mounting the camera (1) Fix the bracket to the installation surface using (1) Aim the "START" arrow at the bent portion of the appropriate bolts, nuts or the like (not supplied). leaf spring. Make sure that everything is tightened securely. Bending Leaf Spring Attachment Pipe...
-
Page 17: Installation
Installation Before starting installation/connection, make sure that the power cable is not connected to an outlet. Read the "Precautions for installation" section before starting installation/connection. ( page 13) Step 1 Step 5 Install the mount bracket. Attach the provided front/rear sun shields to the cam- •... - Page 18 Important: Important: • The stopper of the front/rear sun shields should be • When the power is turned on, the camera will start fitted up to attach them together before attaching rotating and the position will automatically be initial- to the sun shield. ized.
-
Page 19: Connection
Before starting connection, make sure that the circuit breaker is switched off. Failure to do so could result in fire, injury, electric shock or property destruction. To an outlet (220 V to 240 V AC, 50 Hz) for WV-NW960 24 V AC cable for camera... - Page 20 • Network cable • Audio output connector Connect with an Ethernet cable (category 5 or better). Connect a monaural mini plug (ø3.5 mm). Use a pow- ered external speaker. Recommended cable length: Less than 10 m Important: Maximum length of an Ethernet cable that can be connected is 100 m.
-
Page 21: Connection Example
(24 V AC) for WV-NW964 Plug-in power type microphone To an outlet (procure locally) (220 V to 240 V AC) for WV-NW960 Recommended total extended cable length: 1 m <Required cables> Ethernet cable (category 5, cross) When connecting to a network (hub) -
Page 22: Insert/Remove A Mini Sd Memory Card
Insert/remove a mini SD memory card Important: Before inserting the mini SD memory card, turn off the power of the camera first. Insert a mini SD memory card Step 1 Position the camera in order to see the upper portion of the sun shield. -
Page 23: Remove The Mini Sd Memory Card
Remove the mini SD memory card Important: Before removing the mini SD memory card, select "Not use" for "SD memory card" on the [SD memory card] tab of "Basic Setup" on the setup menu first. After configuring the setting above, turn off the power of the camera and then remove the mini SD memory card. -
Page 24: Initialize The Camera
Initialize the camera Use the DIP switch to initialize the camera. Important: The settings including the network settings will be initialized. Note that the preset position settings will not be ini- tialized. Step 1 <View from below> Detach the housing attachment base, and then flip the Green protection sheet on the upper portion of the sun shield. -
Page 25: Configure The Network Settings
When using multiple cameras, it is necessary to configure the network settings of each camera independently. If the Panasonic IP setting software does not work, perform the network settings of the camera and the PC individually on the "Network setup" page of the setup menu. Refer to the setup instructions (PDF) for further information. - Page 26 Step 1 Step 3 Start the Panasonic IP setting software. Complete each network setup item and click the [Apply] button. Step 2 Click the [IP setting] button after selecting the MAC address/IP address of the camera to be configured. Note:...
-
Page 27: Troubleshooting
Troubleshooting Before asking for repairs, check the symptoms on the following table. Contact your dealer if a problem cannot be solved even after checking and trying the solution or if the problem is not described below. Reference Symptom Cause/solution pages •... - Page 28 Inspect the power cable, power plug and connectors periodically. Symptom Cause/solution The power cable insulation is damaged. • The power cable, plug and connectors are worn out. The power cable, plug and This may result in electric shock or a fire. connectors get hot during Unplug the power plug from the AC outlet immediately, and refer to use.
-
Page 29: Specifications
Specifications General Power source 220 V to 240 V AC, 50 Hz (WV-NW960), 24 V AC, 50 Hz (WV-NW964) Power consumption 90 W (WV-NW960), 85 W (WV-NW964) Ambient temperature –40 °C - +50 °C {–40 °F - 122 °F} (Recommended temperature: 35 °C {95 °F} or... - Page 30 Images from 16 cameras (4 cameras x 4 groups) can be displayed simultaneously. Mini SD memory card (option) Manufactured by Panasonic (Performance with this camera has been checked.) Capacity: 64 MB, 128 MB, 256 MB, 512 MB, 1 GB, 2 GB * SD High Capacity (SDHC) card is not compatible with this camera.
-
Page 31: Standard Accessories
Standard accessories Installation guide (this book) ........1 pc. The following are for installation. CD-ROM* ..............1 pc. Front/rear sun shield ..........1 pair Code label..............1 pc. Fixing screws for the front/rear sun shield RJ45 conversion connector ........1 pc..........2 pcs. (incl. a spare screw) Watertight cap............ - Page 32 Matsushita Electric Industrial Co., Ltd. Osaka, Japan http://panasonic.net Importer's name and address to follow EU rules: Panasonic Testing Centre Panasonic Services Europe GmbH Winsbergring 15, 22525 Hamburg F.R.Germany © 2007 Matsushita Electric Industrial Co., Ltd. All Rights Reserved. NM1007-1127 3TR005303BAA...