Table of Contents
Advertisement
Configure the Servers Settings [Server setup]
The mail server and FTP server settings can be configured on the "Server setup" page.
The "Server setup" page has 2 tabs: the [Mail] tab and the [FTP] tab.
Setting the mail server [Mail]
Click the [Mail] tab on the "Server setup" page.
On this page, the settings for the mail server used that sends the alarm mail can be configured.
(1)
(2)
(3)
(4)
(5)
(6)
No.
Item
(1)
[SMTP server address]
(2)
[POP server address]
(3)
[Authentication]
Default: None
None
POP before SMTP
SMTP
(4)
[User name]
(5)
[Password]
(6)
[Sender mail address]
Enter the IP address or host name of the SMTP server used to send e-
mails. To enter the host name for "SMTP server address", it is necessary
to configure the DNS settings on the [Network] tab of the "Network setup"
page. (→ page 52)
Number of characters for the server address: 1 to 128
When "POP before SMTP" is selected for "Authentication", enter the IP
address or host name of the POP server. To enter the host name for
"POP server address", it is necessary to configure the DNS settings on
the [Network] tab of the "Network setup" page. (→ page 52)
Number of characters for the server address: 1 to 128
Select the authentication method to send e-mails from the following:
................................................................................................................
Note
• When you do not know the authentication method for sending e-
mails, consult with the network administrator.
.....................................................................................................................
It is not necessary to clear any authentication to send e-mails.
It is necessary to first clear POP authentication to use the SMTP server to
send e-mails.
It is necessary to clear authentication to send e-mails.
Enter the user name to access the server.
Number of characters for the user name: 1 to 32
Enter the password to access the server.
Number of characters for the password: 0 to 32
Enter the mail address of a sender.
The entered mail address is displayed in the "From" field of the sent mails.
Number of characters for the sender mail address: 3 to 128
50
Description
Advertisement
Table of Contents
