Panasonic WV-NW484S Operating Manual
Network camera sd
Hide thumbs
Also See for WV-NW484S:
- Setup manual (82 pages) ,
- Operating instructions manual (50 pages) ,
- Specifications (2 pages)
Related Manuals for Panasonic WV-NW484S
Summary of Contents for Panasonic WV-NW484S
-
Page 1: Network Camera
Network Camera Operating Manual WV-NW484S Model No. Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. -
Page 2: Preface
Preface About these operating instructions The Instruction Manual for this camera is comprised of three parts: this manual (PDF), Setup Manual (PDF) and Operating Instructions. This manual explains how to operate this camera on a personal computer (hereafter "PC") or over a network, and how to set up this camera on the PC. -
Page 3: Viewer Software
Viewer Software • Images will not be displayed when the viewer software "Network camera View3" is not installed on the PC. This software can be installed directly from the camera or by double clicking "nwcv3setup.exe" on the CD-ROM provided, and then following the on-screen instructions. Important •... -
Page 4: Table Of Contents
Contents Preface ..............2 About these operating instructions. -
Page 5: Monitor Images On A Pc
Monitor Images on a PC The following describes how to monitor images from the camera on a PC. About the Live Page The following shows the functions of the buttons in the "Live" page. (10) (11) (12) (13) (1/2) Item Description [Camera title] The camera title entered for "Camera title"... - Page 6 (2/2) Item Description [ZOOM] Click the desire button to enlarge the displayed image. These settings are different from those of the digital zoom settings screen (Operating Instructions). Only the main area image is enlarged and not the transmitted image. [X1] button Return to the original display size (1x size).
-
Page 7: Monitor Images From A Single Camera
Monitor images from a single camera • Web browser window Launch the web browser on the PC. Enter the IP address designated using the Panasonic IP setup software (→ Operating Instructions) in the [Address] box of the browser. (Example: http://192.168.0.10) .................. - Page 8 ..................................Note • When "Unicast port (AUTO)" or "Unicast port (MANUAL)" is selected for "Transmission type", up to 8 users can access the camera concurrently. Depending on the setup values for "Total bit rate" and "Max bit rate (per 1 client)", the maximum number of access users may be limited to 8 or less users.
-
Page 9: Monitor Images From Multiple Cameras
Monitor images from multiple cameras Images from multiple cameras can be displayed on a multi-screen. 4 cameras can be registered as a group, and camera images for up to 8 cameras (2 groups) can be displayed simultaneously in a multi-screen. For further information about registering cameras, refer to the Setup Manual. -
Page 10: Action At An Alarm Occurrence
Scene change detection alarm : The alarm sounds if the machine is covered with a cloth, the orientation is changed or some other interference occurs. Command alarm : Alarm action will be performed when a Panasonic alarm notice is received from a connected device via the network. Action at an alarm occurrence •... - Page 11 • Notice of an alarm occurrence to the device connected to the alarm output terminal (→ Setup Manual) It is possible to output signals from the alarm output terminal and sound the buzzer when an alarm occurs. The settings for the alarm output can be configured on the [Alarm] tab of the "Alarm setup"...
- Page 12 [Notification] tab of the "Alarm setup" page and on the [Mail] tab of the "Server setup" page (→ Setup Manual). • Notice of an alarm occurrence to desired IP addresses (Panasonic alarm protocol) (→ Setup Manual) Preset IP addresses can be notified of an alarm occurrence.
-
Page 13: Transmit Images To An Ftp Server
Transmit Images to an FTP Server Images can be transmitted to an FTP server. By configuring the following settings, transmission of images captured when an alarm occurs or captured at a designated interval and sent to an FTP server will become available. -
Page 14: Transmit Images At A Designated Interval Or Period (Ftp Periodic Transmission)
Transmit images at a designated interval or period (FTP periodic transmission) Images can be transmitted at a designated interval or period. To transmit images at a designated interval or period, it is necessary to configure the settings in advance. The settings for the FTP server to which images are to be transmitted can be configured on the [FTP] tab of the "Server setup"... -
Page 15: Save Images On The Sd Memory Card When Images Fail To Transmit Using The Ftp Periodic Transmission Function
..................................Note • To use the SD memory recording function featured in Panasonic's network disk recorder, select "OFF" for "FTP periodic transmission" (→ Setup Manual) and "FTP error" for "Save trigger" (→ Setup Manual) on the [SD memory card] tab of the "Basic setup" page. -
Page 16: Viewing Help
Viewing Help If you want to know anything about operation or setup methods on screen, display the "Help" screen. Displaying the Help screen • Setup screen Click the [Setup] button. The setup screen is displayed. Click the [Help] button. The "Help" screen is displayed. •... - Page 17 Panasonic System Solutions Company, Unit Company of Panasonic Corporation of North America Security Systems www.panasonic.com/security For customer support, call 1.877.733.3689 Executive Office: Three Panasonic Way 2H-2, Secaucus, New Jersey 07094 Zone Office Eastern: Three Panasonic Way, Secaucus, New Jersey 07094 Central: 1707 N.