Panasonic i-PRO WV-NW484SE Setup Manual page 32

.........................................................................................................................................................................
Note
• When "Zone No" is selected after selecting "Gray" for the [Mode] setting, the corresponding zone will start
blinking and its colour will change in the following order: dark gray → clear → light gray → clear. When
another zone that already has been set exists in the same image, the colour of the zone will change in the
following order: dark gray → light gray.
• When "Zone No" is selected after selecting "Mosaic" for the [Mode] setting, the corresponding zone will
be displayed with a mosaic effect. When another zone that already has been set exists in the same
image, the colour of the zone will be dark gray.
..............................................................................................................................................................................
32