Table of Contents
Advertisement
Configure the Multi-screen Settings
The cameras to be used for the multi-screen display can be configured on the "Multi-screen setup" page.
.........................................................................................................................................................................
Note
• The following cameras are applicable for the multi-screen display:
• WV-NS202
• WV-NP1000 series
• WV-NS320
..............................................................................................................................................................................
(1)
(2)
No.
Item
(1)
[IP address]
(2)
[Camera title]
• WV-NF284
• WV-NW474S
Enter the IP address or host name of the camera to be used in the multi-
screen display. 4 cameras can be registered as a group and up to 8
cameras can be registered.
When the HTTP port setting for the camera has been changed, enter the
"IP address of the camera:port number".
Example: 192.168.0.10:8080
Number of characters for the host name: 1 to 128
................................................................................................................
Note
• When setting the host name, it is necessary to configure the DNS
settings of the PC to be used for the multi-screen display.
(→ page 52)
.....................................................................................................................
Enter the title of the camera. The entered camera title will be displayed on
a multi-screen.
Number of characters for the camera title: 0 to 20
33
• WV-NP244 series
• WV-NP472
Description
Advertisement
Table of Contents
