Table of Contents
Advertisement
Operating/Storage Altitude ................. Sea Level to 3,048 meters
IP Rating ............................................. IP54
Vibration Limit ..................................... 500 g peak
Drop Test ............................................ 1 meter
Electromagnetic Environment
IEC 61326-1: Portable
FCC ................................................ CFR Title 47, Part 15, Subpart B
Korea (KCC) ................................... Class A Equipment (Industrial
This product meets requirements for industrial (Class A)
electromagnetic wave equipment and the seller or user should take
notice of it. This equipment is intended for use in business
environments and is not to be used in homes.
Before You Start
This section helps you to know the Meter parts, controls,
connections, and status LEDs.
Unpack and Inspect
Carefully unpack and inspect the:
•
Vibration Meter
•
Storage case
•
USB Cable
•
Quick Reference Guide
•
Belt Holster
•
AA (2) Lithium non-rechargeable batteries
(10,000 feet)
Broadcasting & Communication
Equipment)
Storage
When not in use, always keep the Meter in the supplied
storage case. The custom interior of the case supplies
protection for the Meter, documentation, and accessories.
Battery
Before you use the Meter for the first time, install the two
AA lithium non-rechargeable batteries (included). See
Battery Replacement on page 38 for more information.
The Meter also operates on two AA alkaline (3 V)
batteries. Due to short battery life, alkaline batteries are
not recommended.
Set the battery type in the Device Settings menu.
See page 12.
shows on the display when battery power is low.
Replace the batteries before you continue to use the
Meter.
Vibration Meter
Before You Start
Note
5
Advertisement
Table of Contents
