Table of Contents
Advertisement
· D = Diverting (Forwarding) Calls
A D is shown after your extension name on the phone's idle display when you have forward unconditional enabled.
22.17 Group
Your system administrator can include you as a member of a group along with other users. Each group has its own
extension number which can be used as the destination for call.
When a call is presented to a group, it is presented to the available group members, either one at a time or all at the same
time, until answered by one of the members.
How long a group call will ring at each group member before being presented to the next member is controlled by the
group's own settings. Hunt groups also use voicemail and have their own settings for when an unanswered call should go
to the group's mailbox. For group calls, the hunt group's voicemail settings are used rather than your settings.
22.18 Idle Line Preference
Having one of your phone's call or line appearance button set as the currently selected appearance button, means it will
be the appearance button used when you go off hook. If this was not the case, you would need to select an appearance
button before going off hook. Idle line preference automatically selects the first available call appearance or line
appearance as your currently selected button when you do not have a call connected.
22.19 Internal Twinning
This method of twinning twins your normal phone with another internal phone. Your incoming calls will ring on both
phones. You can also make your calls from either extension.
A typical example for internal twinning would be a user who uses both a normal desk phone and also needs a mobile
phone while moving around the building.
Your settings are applied to both phones. Similarly message waiting indication and voicemail access from either phone will
be to your mailbox.
If both your twinned phones are 1400, 1600, 9400, 9500, 9600, M or T-Series phones, the call logs and directory contacts
on each will the same.
22.20 Line Appearance Button
Line appearance buttons allow you to make and receive calls on a specific telephone line connected to your telephone
system. The button also allows you to see when the line is in use by other users.
For incoming calls, the telephone system still determines the destination for the call. That may be a user or group.
However, if you have a line appearance button for the line, you will see that there is a call alerting and can answer it if
required.
· Private Lines
Special behaviour is applied to calls where the user has both a line appearance for the line involved and is also the
Incoming Call Route destination of that call. Such calls will alert only on the Line Appearance button and not on any
other buttons. These calls will also not follow any forwarding.
22.21 Logged Out
If you are logged out from any phone, you are treated as being busy to receiving any calls. Callers follow your forwarding
settings if set or go to voicemail if available.
22.22 Login Code
You can use a login code to login at any phone on the telephone system and then use that phone as your own. While
logged in at a 1400 Series, 1600 Series or 9600 Series phone, you can use the phone's menus to set and change your
login code.
22.23 Missed Call
Missed calls are calls that ring at your phone but are not answered by you. Your 10 most recent missed calls are included
in your call log.
The system administrator can configure whether missed calls should include calls that you did not answer but where
answered for you by another user. For example by a user with a call coverage button set for your calls. If this mode is
enabled, it will also include calls that were answered by your voicemail.
22.24 Missed Group Call
The system administrator can configure whether the telephone system should keep an internal log of missed hunt group
calls. They can then also set which groups of which you are a member, should have their missed calls shown as part of
your missed calls call log. This does not require the group call to have been presented to you and missed.
22.25 Mobile Twinning
Mobile twinning is
twinning
external number. If you have been configured as a mobile twinning user, you can switch use of mobile twinning on or off
through the phone's menus and also change the number to which you are twinned.
9400 Series Phone User Guide
IP Office
where your calls ring at both your phone and at another number which can include an
137
Page 136
Issue 03e (28 March 2011)
Advertisement
Table of Contents
