Advertisement
Installation Safety Instructions (Cont.)
Site and operation safety
6
1300 886 649 (AUS) 0800 836 761 (NZ) |
• No open flames: The sites for installing and maintaining
an air conditioner using refrigerant R32 should be free
from open fires or welding, smoking, drying ovens or
any other heat source higher than 548°C, which easily
produces open fire.
• Ventilation necessary: The installation site should be in a
well-ventilated condition.
• Mind static electricity.
• Protective clothing and anti-static gloves must be
worn.
• Do not use a mobile phone.
Site accessibility
• Choose a site convenient for installation and maintenance.
The air inlets and outlets of both indoor and outdoor units
should not be surrounded by obstacles or close to any
hear source or combustible and/or explosive environment.
• The indoor unit inlet and outlets should be even.
• Avoid areas where there are other electrical products,
power switch plugs and sockets, kitchen cabinets, beds,
sofas or other valuable items directly underneath the
indoor unit.
Refrigerant leak
• If the indoor unit suffers a refrigerant leak during the
installation, it is necessary to immediately turn off the valve
of the outdoor unit.
• Ensure that all installation personnel leave the room until at
least 15 minutes after the refrigerant leak has been fixed.
• If the product is damaged, it must be taken back to the
maintenance station. Do not attempt to weld the refrigerant
pipe or conduct other operations on the user's site.
After Sales Support
info@tempo.org
Advertisement
