Special Function Setting; F90 Setting Of All Functions - SMC Networks ISE30A Series Operation Manual

■Special function setting

■[F90] Setting of all functions
All functions can be set, one after the other.
<Operation>
Press the or
Setting of all functions
or
Press the
[oFF] (unused)
selected.
Press the button
to set.
Return to function
selection mode.
∗1: Setting of functions
Every time the button is pressed, the function steps in the order of Function setting on page 38.
Set using the or
Refer to each section for further details of the setting.
button in function selection mode to display [F90].
Press the button.
button to select all functions.
After the change to [oFF] (unused),
press the
Return to function selection mode.
[F90] Setting of all functions completed
buttons.
Move on to setting of all functions.
Setting of each function
button to set.
Measurement mode
-37-
[on] (used) selected
∗ 1
Press the
button for 2
seconds or longer.
No.PS※※-OML0003-J