F5 Auto-Preset Function - SMC Networks ISE30A Series Operation Manual

■[F 5] Auto-preset function
When hysteresis mode is selected, the auto-preset function can calculate an optimum pressure value
automatically based on the on-going operation.
<Operation>
Press the or
Setting of Auto-preset
or
Press the
Press the
button during measurement mode to set the pressure.
Then press the
button in function selection mode to display [F 5].
Press the button.
button to select auto-preset.
Press the button to set.
Setting of [F 5] Auto-preset function completed
button again to change the pressure setting, while the display is flashing.
Move on to setting of auto-preset.
Return to function selection mode.
-32-
No.PS※※-OML0003-J