Table of Contents
Advertisement
Replacement Parts And Service Information
Spare Parts
A set of spare parts that will periodically require replacement due to normal wear is supplied with the taping
heads. The set includes the following which should be reordered as consumed to keep the taping heads in
production:
HST 3-Inch Taping Head (Upper and Lower)
Qty.
Ref. No.
1
9-6
In addition to the above minimum spare parts, it is suggested that the following spare parts be maintained which
will require replacement under normal wear of the taping head.
HST Taping Head (Upper and Lower)
Qty.
Ref. No.
1
8-9
1
10-15
1
10-15
1
10-16
1
10-16
1
8-28
1
9-19
1
8-34
2
10-22
1
9-11
Replacement Parts and Service
Refer to the first page of this instruction manual "Replacement Parts and Service Information".
Part Number
78-8079-5006-4
Part Number
78-8057-5703-2
78-8015-7213-8
78-8068-3940-9
78-8015-7214-6
78-8068-3941-7
78-8062-3802-4
78-8015-7029-8
78-8062-4157-2
78-8062-4193-7
78-8079-5000-7
21
Description
Blade – 3.33 Inch [77.5 mm]
Description
Spring – Latch
Spring – Torsion, Inner (Lower Head)
Spring – Torsion, Inner (Upper Head)
Spring - Torsion, Outer (Lower Head)
Spring - Torsion, Outer (Upper Head)
Finger - Tape Support
Spring - Tape Cut-off
Roller - Applying
Roller - Buffing
Felt Pad
Advertisement
Table of Contents
