Assembly Parts; Part Orientation - 3M Liqui-Cel EXF-10x28 Series Assembly And Disassembly Instructions

ASSEMBLY PARTS

A. O-rings (4)
Inner O-ring
Outer O-ring
B. Lock ring (2)
C. Center Seal (2)
D. Center Seal Washer
E. L Washer

PART ORIENTATION

To seal the cartridge into the housing, this
7.5 mm O-ring is the shellside or liquid side O-ring.
To seal the cartridge into the end cap, this
6.9 mm O-ring is the lumenside or gas side O-ring.
An elastomeric ring used to position the inner shellside
O-ring.
To seal the center tube of cartridge and center nozzle
of the end cap.
To protect the center seal during tightening.
(not shown)
To compress the center seal during tightening.
(not shown)
B
C
4
A