3M -Matic 8000af Instructions And Parts List
  1. Manuals
  2. Brands
  3. 3M Manuals
  4. Industrial Equipment
  5. 3M-Matic 8000af
  6. Instructions and parts list

3M -Matic 8000af Instructions And Parts List

Adjustable case sealer with accuglide 3 taping heads
Hide thumbs
Table of Contents

Advertisement

Quick Links

Instructions and Parts List
3M-Matic
Type 11800
Adjustable Case Sealer with
AccuGlide
Serial #:
Important Safety Information
BEFORE INSTALLING OR OPERATING THIS EQUIPMENT
Read, understand and follow all safety and operating instructions.
Spare Parts
It is recommended you immediately order the spare parts listed in the "Spare
Parts/Service Information" section. These parts are expected to wear through
normal use, and should be kept on hand to minimize production delays.
3M-Matic
8000af - Type 11800
™
Page i
44-0009-2153-4 / ECO# 0078045
8000af
™
3 Taping Heads
™
For reference, record machine serial number here.
North American - ENG
Date Released:
October 2018

Advertisement

Table of Contents
loading

Related Manuals for 3M 3M-Matic 8000af

Summary of Contents for 3M 3M-Matic 8000af

  • Page 1 Instructions and Parts List 3M-Matic 8000af ™ Type 11800 Adjustable Case Sealer with AccuGlide 3 Taping Heads ™ Serial #: For reference, record machine serial number here. Important Safety Information BEFORE INSTALLING OR OPERATING THIS EQUIPMENT Read, understand and follow all safety and operating instructions.
  • Page 2 3M-Matic 8000af case sealer. 3M Industrial Adhesives and Tapes 3M Center, Building 220-5E-06 St. Paul, MN 55144-1000 Edition October 2018 Copyright 3M - July 2018...

  • Page 3: Replacement Parts And Service Information

    Replacement Parts and Service Information To Our Customers: This is the 3M-Matic /AccuGlide /Scotch equipment you ordered. ™ ™ ® It has been set up and tested in the factory with Scotch Tapes. ® Included with each machine is an Instructions and Parts List Manual.
  • Page 4 North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page iv October 2018 44-0009-2153-4 / ECO# 0078045...
  • Page 5 Replacement Parts and Service Information To Our Customers: This is the 3M-Matic /AccuGlide /Scotch equipment you ordered. ™ ™ ® It has been set up and tested in the factory with Scotch tapes. If any problems occur ® when operating this equipment and you desire a service call or phone consultation, call, write, or fax the appropriate number listed below.
  • Page 6 North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page vi October 2018 44-0009-2153-4 / ECO# 0078045...

  • Page 7: Table Of Contents

    4.11 Box Weight and Size Capacities ......13 – 14 4.12 Machine and Packaged Machine Dimensions .....15 North American - ENG 3M-Matic 8000af - Type 11800 ™...
  • Page 8 North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page viii October 2018 44-0009-2153-4 / ECO# 0078045...
  • Page 9 11.1 Case Sealer Components ..............25 - 26 11.2 Operation Warnings ................27 11.3 Box Size Setup ................28 - 32 11.4 Box Sealing ....................32 11.5 Box Jams ..................33 - 34 North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page ix October 2018...
  • Page 10 North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page x October 2018 44-0009-2153-4 / ECO# 0078045...
  • Page 11 Taping Head Information ™ Manual 2: AccuGlide 3 Taping Heads — 2 Inch (See Manual 2 for Table of Contents) North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page xi October 2018 44-0009-2153-4 / ECO# 0078045...
  • Page 12 AccuGlide ..Trademark of 3M St. Paul, MN 55144-1000 Scotch ..Trademark of 3M St. Paul, MN 55144-1000 Drw... . Drawing Ex.

  • Page 13: Introduction

    1. Introduction Manufacturing Specifi cations / Description / Intended Use The 3M-Matic 8000af Adjustable Case Sealer with AccuGlide ™ ™ pressure-sensitive fi lm Taping Heads is designed to apply a “C” clip of Scotch ® box sealing tape to the top and bottom center seam of regular slotted containers.

  • Page 14: How To Read And Use The Manual

    3M Industrial Adhesives and Tapes Division 3M Center, Bldg. 220-5E-06 St. Paul, MN 55144-1000 (USA) Edition October 2018 © 3M 2018. All rights reserved. The manufacturer reserves the right to change the product at any time without notice. Publication © 3M 2018 44-0009-2153-4.

  • Page 15: General Information

    2.1 Data Identifying Manufacturer and Machine For Commercial Use Only Data for Technical Assistance and Service Agent/Distributor or Local After Sale Service: North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 3 October 2018 44-0009-2153-4 / ECO# 0078045...
  • Page 16 3M. A part will be presumed to have become defective after its warranty period unless the part is received or 3M is notifi ed of the problem no later than fi ve (5) calendar days after the warranty period. If 3M is unable to repair or replace the part within a reasonable time, then 3M at its option, will replace the equipment or refund the purchase price.

  • Page 17: Safety

    Indicates a potentially hazardous situation, which, if not Warning avoided, could result in death or serious injury and/or property damage. North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 5 October 2018 44-0009-2153-4 / ECO# 0078045...

  • Page 18: Table Of Warnings

    Serious injury may occur (Figure 3-4). North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 6 October 2018...
  • Page 19 Figure 3-8 - Always feed boxes into the machine by pushing only from the end of box. (Guarding Removed - for Illustration Purposes Only) North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 7 October 2018...
  • Page 20 - The operator must pay attention qualifi ed personnel to operate and to the blades during the tape service this equipment. replacement. North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 8 October 2018 44-0009-2153-4 / ECO# 0078045...

  • Page 21: Number Of Operators

    Stopped by pressing Adjusting box size the EMERGENCY STOP Tape replacement button Blade replacement Electric power Drive belt replacement disconnected Ordinary maintenance North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 9 October 2018 44-0009-2153-4 / ECO# 0078045...

  • Page 22: Component Locations

    Top Flap Upper Taping Head Compression Rollers Exit Conveyor - optional (not shown) Energy Indicator- Saver Air Pressure Width Adjustment 3M-Matic 8000af ™ Crank Adjustable Adjustable Case Sealer Side Drives Type 11800 (w/Installed Guards) Gate Cams Kicker Machine Bed Infeed...
  • Page 23 78-8070-1336-8 78-8062-4266-1 78-8137-7402-9 STOP 78-8095-1141-9 78-8070-1329-3 78-8113-6883-2 78-8137-1331-6 (Guarding Removed - for Illustration Purposes Only) 78-8070-1339-2 3M Logo (not shown) 78-8111-1496-2 78-8060-8481-6 Leg Height Adjustment Label (not shown) 78-8113-6750-3 Figure 3-10 Warning Labels North American - ENG 3M-Matic 8000af - Type 11800 ™...

  • Page 24: Power Requirements

    The machine is equipped with two 1/6 HP gearmotors and comes with a 2.4m [8 foot] standard neoprene covered power cord and a grounded plug. Contact your 3M Representative for power requirements not listed above. 4.2 Operating Rate: Belt speed is 0.5m/s [100 F.P.M.] Actual production rate is dependent on operator’s dexterity.

  • Page 25: Setup Recommendations

    50mm ± 6mm [2 inch ±1/4 inch] (See "Special Set-Up Procedure" – Changing the Tape Leg Length") 4.10 Box Board: Style – regular slotted containers – RSC 125 to 275 P.S.I. bursting test, single wall B or C fl ute. North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 13...

  • Page 26: Box Weight And Size Capacities

    MUST BE GREATER THAN .6 BOX HEIGHT If any of the above criteria are not met boxes should be test run to assure proper machine performance. North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 14...
  • Page 27 32-1/2 62-86 75-5/8 106.9 24-35 5.25 Weight – approximate 167.8 kg [370 pounds] uncrated approximate 371.8 kg [820 pounds] crated North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 15 October 2018 44-0009-2153-4 / ECO# 0078045...

  • Page 28: Shipment, Handling, And Storage 5.1 Packed Machine Shipment And Handling

    Figure 5-4 - It is possible to stack a maximum of 2 machines (if they are in their original packing). North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 16 October 2018 44-0009-2153-4 / ECO# 0078045...

  • Page 29: Unpacking

    For the disposal of the above materials, please follow the environmental directives or the law in your country. . Figure 6-5 North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 17 October 2018 44-0009-2153-4 / ECO# 0078045...

  • Page 30: Installation

    The columns are shipped in a lower position. To Adjust Columns - See Special Figure 7-3 Set-up Procedure (Section 11) . North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 18 October 2018 44-0009-2153-4 / ECO# 0078045...

  • Page 31: Plastic Ties Removal

    2. Tape Drum Bracket - Install upper tape drum bracket on top cross bar as shown (Figure 7-7B). Figure 7-6 Figure 7-7 North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 19 October 2018 44-0009-2153-4 / ECO# 0078045...

  • Page 32: Taping Heads Completion

    (as shown in Figure 7-9). complies with the safety regulations of your country. North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 20...

  • Page 33: Theory Of Operation

    Inserting a box will re-start the Figure 8-3 machine (Figure 8-2). North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 21 October 2018...

  • Page 34: Controls

    9.2 Box Height Adjusting Crank Figure 9-2 Figure 9-3 9.3 On/Off Switch/Energy Saver On/Off Switch 9.4 Latching Emergency Stop Button E-Stop Figure 9-4 North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 22 October 2018 44-0009-2153-4 / ECO# 0078045...

  • Page 35: Safety Devices

    • Have wire size 1.5mm dia. [AWG 16] personnel to operate and service this • Have a max. length 30.5m [100 ft] equipment. • Be properly grounded. North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 23 October 2018...
  • Page 36 North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 24 October 2018 44-0009-2153-4 / ECO# 0078045...

  • Page 37: Operation

    Box Gate "on/off " Switch Valve/ Air Pressure Pressure Regulator Energy Control Regulator/Filter Figure 11-1 Controls (continued on next page) North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 25 October 2018 44-0009-2153-4 / ECO# 0078045...
  • Page 38 Up to Valve Adjust Down to Lock Solenoid Air Supply Exhaust Connector Valve Regulator Figure 11-2 Filter Figure 11-3 Gate/Kicker Cams North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 26 October 2018 44-0009-2153-4 / ECO# 0078045...

  • Page 39: Operation Warnings

    Blade location. Keep hands out of these areas except as necessary to service the taping heads. 10. Failure to comply with these Warnings could result in severe personal injury and/or equipment damage. North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 27...

  • Page 40: Box Size Setup

    Move the compression rolls as wide as possible. Figure 11-5 Box Size Setup North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 28 October 2018 44-0009-2153-4 / ECO# 0078045...
  • Page 41 5mm Hex Key Figure 11-7 Box Size Setup North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 29 October 2018 44-0009-2153-4 / ECO# 0078045...
  • Page 42 Move compression rollers in to press box top fl aps fi rmly together. Restart machine to exit box Figure 11-9 Box Size Setup North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 30 October 2018...
  • Page 43 Note – Box fl aps should not be bent outward past vertical more than 15° when entering case sealer. Top View (Infeed End) Figure 11-11 Box Size Setup North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 31 October 2018 44-0009-2153-4 / ECO# 0078045...

  • Page 44: Box Sealing

    In some cases they may feel hot to the touch. 2. Adjustment of the machine or taping heads are described in the "Adjustment" section of this manual. North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 32...

  • Page 45: Box Jams

    5. Readjust upper head and drive belts according to "Machine Adjustment for Box Size" instructions. 6. Connect air and electrical supplies. 7. Turn machine "On" (I). North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 33...

  • Page 46: Cleaning

    TAPING HEAD LUBRICATION – can contaminate the tape's adhesive. See Manual 2 "Maintenance – Lubrication". Figue 12-1 Lubrication Points North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 34 October 2018...

  • Page 47: Drive Belt Replacement/Tensioning

    − Never attempt to work on any part of the machine, load tape, or remove jammed boxes from the machine while the machine is running. 12.3 Drive Belt Replacement/Tension Adjustment Note – 3M recommends the replacement of drive belts in pairs, especially if belts are unevenly worn. REPLACEMENT – STEPS 1-11 TENSION ADJUSTMENT –...
  • Page 48 25mm [1 in] defl ection at midspan Box Drive Belt with 3.5 kg [7 lb] pull force Figure 12-4 Drive Belt Tension Adjustment (Top View) North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 36 October 2018...

  • Page 49: Air Line Filter

    − Keep hands and fi ngers away from tape cutoff blades under orange blade guards. The blades are extremely sharp. North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 37 October 2018 44-0009-2153-4 / ECO# 0078045...

  • Page 50: Gate Operation

    – Manual 2 Applying Mechanism Spring – Manual 2 One-Way Tension Roller – Manual 2 Tape Leg Length Adjustment – Manual 2 North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 38 October 2018 44-0009-2153-4 / ECO# 0078045...

  • Page 51: Upper Taping Head Leveling

    4. Retighten fi ve (5) bolts on each side of crossbar to secure adjustment. Take Measurement Here Figure 13-2 Upper Taping Head Leveling North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 39 October 2018 44-0009-2153-4 / ECO# 0078045...

  • Page 52: Gate Pressure Regulator

    To do this, remove the center roller section and turn the stop nuts clockwise until the desired lift is achieved. Figure 13-4 Gate Stroke Setting North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 40 October 2018...

  • Page 53: Special Set-Up Procedure

    M6 × 16 fl at head cap screws (A). Note – Both drive belt assemblies must be installed at same operating height. Figure 14-2 Drive Belt Height, Reassembly North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 41 October 2018...

  • Page 54: Changing Tape Leg Length

    4. Refer to Manual 2, "Adjustments – Changing Tape Leg Length" for taping head setup. 5. Replace taping heads in case sealer, reverse of disassembly. Figure 14-3 Removing Taping Heads from Case Sealer North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released:...

  • Page 55: Outer Columns Re-Positioning

    “Adjustments – Upper Taping Head Leveling”. Machine Frame 306mm [12 inches] (Minimum) Outer Column 100mm [12 inches] Minimum Figure 14-4 Column Re-Positioning North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 43 October 2018 44-0009-2153-4 / ECO# 0078045...
  • Page 56 North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 44 October 2018 44-0009-2153-4 / ECO# 0078045...

  • Page 57: Maintenance Work Log

    ________ ________________________________________________________________ ________ ________________________________________________________________ ________ ________________________________________________________________ ________ ________________________________________________________________ ________ ________________________________________________________________ ________ ________________________________________________________________ ________ ________________________________________________________________ ________ ________________________________________________________________ ________ ________________________________________________________________ ________ ________________________________________________________________ North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 45 October 2018 44-0009-2153-4 / ECO# 0078045...

  • Page 58: Troubleshooting

    Reinstall removable gate cam kicker does not kick gate cam has been removed portion and boxes shorter than 12 inches are being run North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 46 October 2018 44-0009-2153-4 / ECO# 0078045...

  • Page 59: Additional Instructions

    (Figure 14-2). Figure 17-2 17. Additional Information 17.1 Statement of Conformity 17.2 Emission of Hazardous Substances Nothing to report North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 47 October 2018 44-0009-2153-4 / ECO# 0078045...
  • Page 60 North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 48 October 2018 44-0009-2153-4 / ECO# 0078045...

  • Page 61: Electric Diagrams

    18. Technical Diagrams 18.1 Electric Diagrams - 1 Phase 115V 60Hz Figure 18-1 Electrical Diagram / 1 Phase 115V 60Hz North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 49 October 2018 44-0009-2153-4 / ECO# 0078045...
  • Page 62 18. Technical Diagrams 18.1 Electric Diagrams - 1 Phase 115V 60Hz Figure 18-1 Electrical Diagram / 1 Phase 115V 60Hz (continued) North American - ENG 3M-Matic ™ 8000af - Type 11800 Date Released: Page 50 October 2018 44-0009-2153-4 / ECO# 0078045...
  • Page 63 18. Technical Diagrams 18.1 Electric Diagrams - 1 Phase 115V 60Hz Figure 18-1 Electrical Diagram / 1 Phase 115V 60Hz (continued) North American - ENG 3M-Matic ™ 8000af - Type 11800 Date Released: Page 51 October 2018 44-0009-2153-4 / ECO# 0078045...
  • Page 64 18. Technical Diagrams 18.1 Electric Diagrams - 1 Phase 115V 60Hz Figure 18-1 Electrical Diagram / 1 Phase 115V 60Hz (continued) North American - ENG 3M-Matic ™ 8000af - Type 11800 Date Released: Page 52 October 2018 44-0009-2153-4 / ECO# 0078045...
  • Page 65 18. Technical Diagrams 18.1 Electric Diagrams - 1 Phase 115V 60Hz Figure 18-1 Electrical Diagram / 1 Phase 115V 60Hz (continued) North American - ENG 3M-Matic ™ 8000af - Type 11800 Date Released: Page 53 October 2018 44-0009-2153-4 / ECO# 0078045...
  • Page 66 18. Technical Diagrams 18.1 Electric Diagrams - Terminal Connections Figure 18-1 Electrical Diagram / 1 Phase 115V 60Hz (continued) North American - ENG 3M-Matic ™ 8000af - Type 11800 Date Released: Page 54 October 2018 44-0009-2153-4 / ECO# 0078045...
  • Page 67 18. Technical Diagrams 18.1 Electric Diagrams - Terminal Connections Figure 18-1 Electrical Diagram / 1 Phase 115V 60Hz (continued) North American - ENG 3M-Matic ™ 8000af - Type 11800 Date Released: Page 55 October 2018 44-0009-2153-4 / ECO# 0078045...
  • Page 68 18. Technical Diagrams 18.1 Electric Diagrams - Pin Connections / 1 Phase 115V 60Hz Figure 18-1 Electrical Diagram / 1 Phase 115V 60Hz (continued) North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 56 October 2018...

  • Page 69: Pneumatic Diagram

    18. Technical Diagrams Figure 18-3 Pneumatic Diagram / 1 Phase 115V 60Hz Figure 18-2 Pneumatic Diagram / 1 Phase 115V 60Hz (continued) North American - ENG 3M-Matic ™ 8000af - Type 11800 Date Released: Page 57 October 2018 44-0009-2153-4 / ECO# 0078045...
  • Page 70 North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 58 October 2018 44-0009-2153-4 / ECO# 0078045...

  • Page 71: Spare Parts

    • Machine Model • Serial Number • Figure Number • Position Tool Kit • 3M Part Number (11 Digits) A tool kit, part number 78-8060-8476-6, • Description is supplied with the machine as a stock • Quantity item. The kit contains the necessary open...
  • Page 72 Options and Accessories Type 40800 For additional information on the options and Frame Assemblies accessories listed below - contact your 3M Representative. To Order Parts: 1. Refer to fi rst illustration, Part Number Option / Accessory Frame Assemblies, for the...

  • Page 73: Options / Accessories

    Important – Not all the parts listed are normally stocked items. Some parts or assemblies shown are available only on a special order basis. Contact 3M/Tape Dispenser Parts to confi rm item availability. North American - ENG 3M-Matic 8000af - Type 11800 ™...
  • Page 74 North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 62 October 2018 44-0009-2153-4 / ECO# 0078045...
  • Page 75 Figure 16074 Figure 16071 Figure 16081 Figure 16085 Figure 16077 Figure 16078 Figure 16082 (Not Shown) Frame Figure 16075 Assemblies North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 63 October 2018 44-0009-2153-4 / ECO# 0078045...
  • Page 76 8000af 12 11 14 20 13 Figure 16070 North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 64 October 2018 44-0009-2153-4 / ECO# 0078045...
  • Page 77 8000af Figure 16070 Figure 16070 Ref. No. 3M Part No. Description 16070-1 78-8070-1565-2 Tape Drum Bracket Assembly 16070-2 78-8137-8634-6 Bracket – Tape Drum 16070-3 78-8070-1395-4 Bracket – Bushing Assembly 16070-4 78-8070-1568-6 Cap – Bracket 16070-5 78-8076-4519-3 Shaft – Tape Drum...
  • Page 78 8000af Figure 16071 North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 66 October 2018 44-0009-2153-4 / ECO# 0078045...
  • Page 79 8000af Figure 16071 Ref. No. 3M Part No. Description 16071-1 78-8059-5625-3 Bearing / 28-12-8 16071-2 26-1000-4350-9 Ball Bearing - Radial 6002-2RS, O.D. 32 16071-3 78-8076-4815-5 Screw - Bearing 16071-4 78-8076-4816-3 Bushing 16071-5 78-8010-7210-5 Screw - M6X20 Soc. Hd. Hex. Soc.
  • Page 80 8000af Figure 16072 North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 68 October 2018 44-0009-2153-4 / ECO# 0078045...
  • Page 81 8000af Figure 16072 Ref. No. 3M Part No. Description 16072-1 78-8137-8601-5 Support – Upper Head 16072-2 78-8076-4823-9 Cover – Rear 16072-3 26-1003-7951-5 Screw – Soc Hd Hex Soc, M5 x 20 16072-4 78-8076-4824-7 Frame Assembly – Upper, R/H (W/English Label)
  • Page 82 8000af Figure 16073 North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 70 October 2018 44-0009-2153-4 / ECO# 0078045...
  • Page 83 8000af Figure 16073 Ref. No. 3M Part No. Description 16073-1 78-8137-8602-3 Compression Roller Assembly 16073-2 78-8137-7901-0 Compression Roller Support Assembly (w/English Label) 16073-3 78-8076-4628-2 Roller – Compression 16073-4 78-8076-4629-0 Shaft – Roller 16073-5 26-1003-5841-0 Screw – M8 x 16 16073-6 78-8017-9318-9 Washer –...
  • Page 84 8000af Figure 16074 North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 72 October 2018 44-0009-2153-4 / ECO# 0078045...
  • Page 85 8000af Figure 16074 Ref. No. 3M Part No. Description 16074-1 78-8091-0660-8 Housing - Wire 16074-2 78-8137-7853-3 Cover 16074-3 78-8060-7758-8 Grommet - DG13,5 16074-4 78-8137-7824-4 Chain 16074-5 78-8137-0965-2 Bracket - Cable Chain 16074-6 78-8005-5741-1 Washer - M5 Flat 16074-7 26-1003-7949-9 Screw - M5X12 Soc. Hd. Hex. Soc.
  • Page 86 8000af Figure 16075 North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 74 October 2018 44-0009-2153-4 / ECO# 0078045...
  • Page 87 8000af Figure 16075 / 1 Ref. No. 3M Part No. Description 16075-1 78-8137-7954-9 Regulator Assembly - Centering 16075-2 78-8137-8248-5 Filter - Regulator Assembly 24VDC 16075-3 78-8137-8337-6 Hinge - Female Ø40 16075-4 78-8137-8551-2 Regulator - Flux MRF 16075-5 78-8057-5747-9 Mount - Cylinder (Rod End)
  • Page 88 8000af 88 87 19 18 100 101 Optional Figure 16077 / 1 North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 76 October 2018 44-0009-2153-4 / ECO# 0078045...
  • Page 89 8000af Figure 16077 / 1 Ref. No. 3M Part No. Description 16077-1 78-8137-8603-1 Bed Conveyor 16077-2 78-8076-5381-7 Leg Assembly – Inner, W/Stop 16077-3 78-8076-5382-5 Leg – Inner 16077-4 78-8060-8480-8 Pad – Foot 16077-5 26-1002-4176-4 Screw 16077-6 78-8017-9313-0 Nut – Self-Locking, M8...
  • Page 90 8000af Figure 16077 / 2 North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 78 October 2018 44-0009-2153-4 / ECO# 0078045...
  • Page 91 8000af Figure 16077 / 2 Ref. No. 3M Part No. Description 16077-30 78-8076-4272-8 Support Assembly W/Cam – Gate 16077-31 78-8076-4773-6 Support Assembly – Cam, Gate 16077-32 26-1003-7947-3 Screw – Soc Hd Hex Soc, M4 x 35 16077-33 78-8054-8758-0 Spacer – Valve Holder...
  • Page 92 8000af Figure 16077 / 3 North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 80 October 2018 44-0009-2153-4 / ECO# 0078045...
  • Page 93 8000af Figure 16077 / 3 Ref. No. 3M Part No. Description 16077-58 78-8076-4783-5 Plate – Actuator 16077-59 78-8137-8607-2 Conveyor Assembly – Center 16077-60 78-8137-8608-0 Conveyor – Center 16077-61 78-8060-7693-7 Roller – 32 x 38 16077-62 78-8076-4766-0 Shaft – /8 x 83...
  • Page 94 8000af Figure 16077 / 4 North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 82 October 2018 44-0009-2153-4 / ECO# 0078045...
  • Page 95 8000af Figure 16077 / 4 Ref. No. 3M Part No. Description 16077-87 78-8060-7876-8 Cover Plug – Lateral 16077-88 78-8028-8208-0 Screw – 6P x 9,5 16077-89 78-8060-7873-5 Plug – Female 16077-90 78-8060-7877-6 Plug Housing – Vertical 16077-91 78-8060-7875-0 Plug – Male...
  • Page 96 8000af Figure 16078 North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 84 October 2018 44-0009-2153-4 / ECO# 0078045...
  • Page 97 8000af Figure 16078 Ref. No. 3M Part No. Description 16078-1 78-8091-0741-6 Arm Assembly – Front, R/H 16078-2 78-8091-0742-4 Arm Assembly – Front, L/H 16078-3 78-8091-0743-2 Arm Assembly – Rear, R/H 16078-4 78-8091-0744-0 Arm Assembly – Rear, L/H 16078-5 78-8076-4791-8 Bushing...
  • Page 98 8000af Figure 16085 North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 86 October 2018 44-0009-2153-4 / ECO# 0078045...
  • Page 99 8000af Figure 16085 / 1 Ref. No. 3M Part No. Description 16085-1 78-8137-8694-0 Side Drive Assembly – R/H 78-8137-8694-7 16085-2 Side Drive Assembly – L/H 16085-3 78-8137-8625-4 Guide – Lower, R/H 16085-4 78-8137-8696-5 Guide – Lower, L/H 16085-5 78-8137-8626-2 Guide – Upper, R/H...
  • Page 100 8000af Figure 16085 / 2 North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 88 October 2018 44-0009-2153-4 / ECO# 0078045...
  • Page 101 8000af Figure 16085 / 2 Ref. No. 3M Part No. Description 16085-39 78-8076-5105-0 Pulley Assembly – Drive 16085-40 78-8052-6713-1 Ring – Polyurethane 16085-41 78-8017-9096-1 Nut – Special, M18 x 1 16085-42 78-8076-5442-7 Flange Assembly 16085-43 26-0001-5862-1 Screw – Flat Hd Soc, M5 x 12...
  • Page 102 8000af Figure 16080 / 1 North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 90 October 2018 44-0009-2153-4 / ECO# 0078045...
  • Page 103 8000af Figure 16080 / 1 Ref. No. 3M Part No. Description 16080-1 78-8137-8557-9 Safety - Upright 16080-2 78-8137-8558-7 Support - Safety 16080-3 78-8137-8559-5 Cap - 100x40 Nero 16080-4 78-8137-8560-3 Bracket 16080-5 78-8137-8561-1 Support - External Protection Cover 16080-6 78-8137-8562-9 Support - Protection...
  • Page 104 8000af Figure 16080 / 2 North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 92 October 2018 44-0009-2153-4 / ECO# 0078045...
  • Page 105 8000af Figure 16080 / 2 Ref. No. 3M Part No. Description 16080-16 78-8137-8565-2 Cover - Emergency Pushbutton 16080-17 78-8137-8566-0 Support - Emergency Pushbutton 16080-18 78-8137-8343-4 Pushbutton - Emergency - M22 16080-19 78-8137-7893-9 Box - Yellow Black Hole M22-IY1 16080-20 78-8137-8567-8...
  • Page 106 8000af Figure 16082 North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 94 October 2018 44-0009-2153-4 / ECO# 0078045...
  • Page 107 8000af Figure 16082 Ref. No. 3M Part No. Description 16082-1 78-8137-8579-3 Electric Box - 7610003 - OPCP204013G 16082-2 78-8137-4084-8 Fuse Holder - 10,3X38 78-8137-8348-3 Fuse - 10X38 1A CSA 16082-3 78-8137-8259-2 Power Supply - AL2403E 24V 3A 16082-4 78-8091-0412-4 Terminal - VU 4-2.5...
  • Page 108 8000af Figure 16081 North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 96 October 2018 44-0009-2153-4 / ECO# 0078045...
  • Page 109 8000af Figure 16081 Ref. No. 3M Part No. Description 16081-1 78-8137-8542-1 Support - Flap Folder w/Inserts 16081-2 78-8076-4832-0 Plate - Box Guide 16081-3 78-8137-8624-7 Flap Folder - Front 16081-4 78-8076-4840-3 Cover 16081-5 78-8076-4830-4 Cover - Flap Folder Support 16081-6 78-8056-3965-1...
  • Page 110 North American - ENG 3M-Matic 8000af - Type 11800 ™ Date Released: Page 98 October 2018 44-0009-2153-4 / ECO# 0078045...
  • Page 111 Instructions and Parts List 3M-Matic Accuglide ™ ™ Type 10800 Upper and Lower High Speed Taping Heads 2 Inch Serial #: For reference, record machine serial number here. Important Safety Information BEFORE INSTALLING OR OPERATING THIS EQUIPMENT Read, understand and follow all safety and operating instructions.
  • Page 112 North American - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 ™ Date Released: Page ii 05-22-18 44-0009-2070-0 / ECO#0078483...
  • Page 113 Replacement Parts and Service Information To Our Customers: This is the 3M-Matic /AccuGlide /Scotch equipment you ordered. ™ ™ ® It has been set up and tested in the factory with Scotch Tapes. ® Included with each machine is an Instructions and Parts List manual.
  • Page 114 North American - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 ™ Date Released: Page iv 05-22-18 44-0009-2070-0 / ECO#0078483...
  • Page 115 Replacement Parts and Service Information (continued) To Our Customers: This is the 3M-Matic /AccuGlide /Scotch equipment you ordered. It has been set up ™ ™ ® and tested in the factory with Scotch tapes. ® Included with each machine is an Instructions and Parts List Manual.
  • Page 116 North American - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 ™ Date Released: Page vi 05-22-18 44-0009-2070-0 / ECO#0078483...
  • Page 117 Replacement Parts and Service .........21 Replacement Parts Illustrations and Parts List ..23-End of Manual North American - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 ™...

  • Page 118: Equipment Warranty And Limited Remedy

    If any part is defective within this warranty period, your exclusive remedy and 3M’s and seller’s sole obligation shall be, at 3M’s option, to repair or replace the part. 3M must receive actual notice of any alleged defect within a reasonable time after it is discovered, but in no event shall 3M have any obligation under this warranty unless it receives such notice within fi ve (5) business days after the expiration of the warranty period.

  • Page 119: Intended Use

    ® seam of regular slotted containers. These taping heads are incorporated into most standard 3M-Matic™ case sealers. The compact size and simplicity of the taping head also makes it suitable for mounting in box conveying systems other than 3M-Matic™ case sealers. This includes replacement of other types of taping, gluing or stapling heads in existing case sealing machines.
  • Page 120 North American - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 ™ Date Released: Page 2 05-22-18 44-0009-2070-0 / ECO#0078483...

  • Page 121: Taping Head Contents / How To Use Manual

    (ELV), a glossary with a defi nition of symbols, plus a parts list of the 3M-Matic™ Accugllide 3 (2 inch) 3M Industrial Adhesives and Tapes Division 3M Center, Bldg. 220-5E-06 St. Paul, MN 55144-1000 (USA) Edition Julyr 2018/ Copyright 3M 2018.

  • Page 122: Important Safeguards

    The blades are extremely sharp. system is running (Important Safeguards continued on next page) North American - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 ™ Date Released: Page 4...
  • Page 123 See "Replacement Parts Illustrations and Parts Lists" for label part numbers. Upper Taping Head Label 78-8137-3317-3 Lower Taping Head Label 78-8137-3316-5 78-8070-1335-0 Figure 1-1 Replacement Labels/3M Part Numbers North American - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 ™...

  • Page 124: Specifi Cations

    5. Box Size Capacities: For use with center seam regular slotted containers. When upper and lower taping heads are used on “3M-Matic” case sealers, refer to the respective instruction manual specifi cations for box weight and size capacities. 6. Operating Rate: Conveyor speeds up to 0.5 m/s [100 feet per minute].
  • Page 125 * This dimension can be reduced to 90mm [3-1/2 in.] when both heads are converted to 50mm [2 in.] tape leg lengths. Figure 2-1 Dimensional Drawing North American - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 ™ Date Released: Page 7...

  • Page 126: Installation

    Taping Head is supplied with a buffi ng the transportation company and also arm guard. Adjustments to guard may notify your 3M Representative. be required to install taping head into some older design case sealers. Installation Guidelines 4.

  • Page 127: Operation

    Tape Adhesive Side Tape Supply Roll Tape Drum Figure 3-2 Taping Head Components/Threading Diagram - Lower Head North American - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 ™ Date Released: Page 9 05-22-18 44-0009-2070-0 / ECO#0078483...

  • Page 128: Tape Loading - Upper Taping Head

    2. Lower taping head is loaded and Figure 3-3 Tape Loading/Threading threaded in same manner as upper head. North American - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 ™ Date Released: Page 10...
  • Page 129 Excess tape can be cut with a scissors at applying roller. Figure 3-4 Tape Loading/Threading Figure 3-5 Tape Loading/Threading North American - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 ™ Date Released: Page 11 05-22-18...

  • Page 130: Maintenance

    Should tape adhesive build-up occur on blade, carefully wipe clean with an oily cloth. (Maintenance continued on next page.) North American - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 ™ Date Released: Page 12 05-22-18...

  • Page 131: Cleaning

    See Figure 4-2. North American - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 ™ Date Released: Page 13 05-22-18...

  • Page 132: Adjustments

    - Never attempt to work on the taping head or load tape while the box drive system is running (adjustments continued on next page.) North American - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 ™ Date Released: Page 14...

  • Page 133: Applying Mechanism Spring

    Figure 5-5 One-Way Tension Roller head or load tape while the box drive system is running (Adjustments continued on next page.) North American - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 ™ Date Released: Page 15...

  • Page 134: Tape Leg Length

    The blades are extremely sharp. North American - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 ™ Date Released: Page 16...

  • Page 135: Troubleshooting Guide

    If not, press bearing further into roller or replace roller. North American - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 ™ Date Released: Page 17...
  • Page 136 Centering guides not centered Adjust centering guides Box fl aps not of equal length Check box specifi cations North American - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 ™ Date Released: Page 18 05-22-18...

  • Page 137: Spare Parts/Service Information

    Spring – Torsion Replacement Parts and Service Refer to the fi rst page of this instruction manual “Replacement Parts and Service Information". North American - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 ™ Date Released: Page 19...
  • Page 138 North American - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 ™ Date Released: Page 20 05-22-18 44-0009-2070-0 / ECO#0078483...

  • Page 139: Replacement Parts Illustrations And Parts List

    Information" for replacement parts ordering information. Important – Not all the parts listed are normally stocked items. Some parts or assemblies shown are available only on a special order basis. Contact 3M/Tape Dispenser Parts to confi rm item availability. North American - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 ™...
  • Page 140 North American - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 ™ Date Released: Page 22 05-22-18 44-0009-2070-0 / ECO#0078483...
  • Page 141 Figure 10401 Figure 10925 Figure 10924 Figure 10923 Figure 10922 Figure 10919 Figure 10921 Figure 10920 North American - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 ™ Date Released: Page 23 05-22-18 44-0009-2070-0 / ECO#0078483...
  • Page 142 ™ AccuGlide 3 - 2" Figure 10925 – Upper Head North American - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 ™ Date Released: Page 24 05-22-18 44-0009-2070-0 / ECO#0078483...
  • Page 143 ™ AccuGlide 3 - 2" Figure 10925 – 2" Upper Head Ref. No. 3M Part No. Description 10925-1 78-8137-3294-4 Frame – Tape Mount Upper Assembly 10925-2 78-8137-3295-1 Frame – Front Upper Assembly 10925-3 78-8068-4143-9 Guide – #1 10925-4 78-8068-4144-7 Guide – #2...
  • Page 144 ™ AccuGlide 3 - 2" 12 11 Figure 10922 – Upper and Lower Heads North American - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 ™ Date Released: Page 26 05-22-18 44-0009-2070-0 / ECO#0078483...
  • Page 145 ™ AccuGlide 3 - 2" Figure 10922 – 2" Upper and Lower Heads Ref. No. 3M Part No. Description 10922-1 78-8133-9509-8 Applying Arm #1 10922-2 78-8133-9510-6 Applying Arm #2 10922-3 78-8070-1221-2 Plate – Tape 10922-4 78-8070-1309-5 Shaft Roller 10922-5 78-8070-1367-3 Roller –...
  • Page 146 ™ AccuGlide 3 - 2" 12 11 Figure 10919 – Upper Head North American - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 ™ Date Released: Page 28 05-22-18 44-0009-2070-0 / ECO#0078483...
  • Page 147 ™ AccuGlide 3 - 2" Figure 10919 – 2" Upper Head Ref. No. 3M Part No. Description 10919-1 78-8137-3300-9 Buffi ng Arm – Sub Assembly 10919-2 78-8137-3301-7 Buffi ng Arm – Sub Assembly 10919-3 78-8052-6575-4 Shaft – Roller 10919-4 78-8137-1398-5 Roller - Buffi...
  • Page 148 ™ 3 - 2" Figure 10923 Upper and Lower Heads Figure 10923 – Upper and Lower Heads North American - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 ™ Date Released: Page 30 05-22-18 44-0009-2070-0 / ECO#0078483...
  • Page 149 ™ AccuGlide 3 - 2" Figure 10923 – 2" Upper and Lower Heads Ref. No. 3M Part No. Description 10923-1 78-8137-3302-5 Link – Assembly 10923-3 78-8137-3304-1 Shaft – Pivot, Buffi ng 10923-4 78-8017-9082-1 Bearing – Special 30 mm 10923-5 78-8017-9106-8 Screw –...
  • Page 150 ™ AccuGlide 3 - 2" Figure 10921 – Upper and Lower Heads North American - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 ™ Date Released: Page 32 05-22-18 44-0009-2070-0 / ECO#0078483...
  • Page 151 ™ AccuGlide 3 - 2" Figure 10921 – 2" Upper and Lower Heads Ref. No. 3M Part No. Description 10921-1 78-8137-3307-4 Frame – Cut-Off Weldment 10921-2 78-8017-9173-8 Blade – 65 mm/2.56 Inch 10921-3 26-1003-8596-7 Screw - Hex Hd M5 x 8 w/ Ext. Tooth Lockwasher...
  • Page 152 ™ AccuGlide 3 - 2" Figure 10401 – Upper and Lower Heads North American - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 ™ Date Released: Page 34 05-22-18 44-0009-2070-0 / ECO#0078483...
  • Page 153 ™ AccuGlide 3 - 2" Figure 10401 – 2" Latch Upper and Lower Heads Ref. No. 3M Part No. Description 10401-1 78-8070-1395-4 Bracket – Bushing Assembly 10401-2 78-8076-4519-3 Shaft – Tape Drum, 50mm 10401-3 78-8017-9169-6 Nut – M18 x 1...
  • Page 154 ™ AccuGlide 3 - 2" 17 19 Figure 10924 – Lower Head North American - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 ™ Date Released: Page 36 05-22-18 44-0009-2070-0 / ECO#0078483...
  • Page 155 ™ AccuGlide 3 - 2" Figure 10924 – 2" Lower Head Ref. No. 3M Part No. Description 10924-1 78-8137-3296-9 Frame – Tape Mount Lower Assembly 10924-2 78-8137-3297-7 Frame – Front Lower Assembly 10924-3 78-8068-4144-7 Guide – #2 10924-4 78-8068-4143-9 Guide – #1...
  • Page 156 ™ AccuGlide 3 - 2" Figure 10920 – Lower Head North American - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 ™ Date Released: Page 38 05-22-18 44-0009-2070-0 / ECO#0078483...
  • Page 157 AccuGlide ™ 3 - 2" Figure 10920– Lower Head Ref. No. 3M Part No. Description 10920-1 78-8137-3300-9 Buffi ng Arm – Sub Assembly 10920-2 78-8137-3301-7 Buffi ng Arm – Sub Assembly 10920-3 78-8052-6575-4 Shaft – Roller 10920-4 78-8137-1398-5 Roller - Buffi ng Assembly...
  • Page 158 North American - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 ™ Date Released: Page 40 05-22-18 44-0009-2070-0 / ECO#0078483...
  • Page 159 North American - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 ™ Date Released: Page 41 05-22-18 44-0009-2070-0 / ECO#0078483...
  • Page 160 North American - ENG 3M-Matic Accuglide 3 - 2 Inch Taping Head - Type 10800 ™ Date Released: Page 42 05-22-18 44-0009-2070-0 / ECO#0078483...

Table of Contents