Table of Contents
Advertisement
Figure 86. Connecting USB 3.0 cable
After installing the operator panel tray assembly, complete the following steps:
1. Reinstall the top cover (see
2. Reconnect the power cords and any cables that you removed.
3. Install the server in the rack.
4. Power on the server and any peripheral devices.
Demo video
Watch the procedure on YouTube
Remove the front operator panel
Use this procedure to remove the front operator panel.
With the operator panel tray assembly removed from the system (see
assembly" on page
89) , complete the following steps to remove the front operator panel:
Step 1.
Press on the two release tabs on the rear of the front operator panel, and carefully slide the
assembly out of from the tray assembly.
Figure 87. Front operator panel removal
ThinkSystem SR850 Maintenance Manual
92
"Install the top cover" on page
146).
"Remove the operator panel tray
Advertisement
Table of Contents
