Hardware installation instructions
For instructions on how to connect your Wi-Fi 6 Gateway, refer to the Quick Start Guide available at
https://support.netcommwireless.com/products/CF40MESH
Setting up your Internet connection
If you received your gateway from your service provider and they have provided you with their own instructions, refer to those to
complete the setup. In some cases, the gateway has been pre-configured for you and is ready to use.
Note –
Otherwise, you will need to complete the setup yourself. Refer to the Basic setup section of this User Guide.
Device overview
Interfaces
The Wi-Fi 6 Gateway is designed to be placed on a desktop with the top facing upward.
All of the cables exit from the rear for easy organization along with the power and WPS buttons.
Top view
There are five LED lights on the top of the Wi-Fi 6 Gateway:
CF40MESH Wi-Fi 6 Gateway– User Guide
UG01438 v1.00 December 2022
Figure 1 – Wi-Fi 6 Gateway top view
7 of 56
Need help?
Do you have a question about the NetComm CF40MESH and is the answer not in the manual?