Reboot And Reset; Backup And Restore; Backup; Restore - Casa Systems NetComm CF40MESH User Manual

Reboot and Reset

Click the Reboot button to turn the device off and then back on using the existing settings.
If the problem you are troubleshooting persists, click the Reset button to delete current user defined
settings and reapply all factory default settings. This will permanently delete all current settings.
We recommend that prior to clicking the Restore button you create a backup file which you can later use to restore those settings
should the problem not be solved by restoring the factory default settings.
Note –
See next section for the Backup and Restore process.

Backup and Restore

Backup

Click the Backup button to create a backup file which contains all the current settings.
A file with device details and the -backup.tar.gz file extension will be downloaded into your browser's
default download folder.

Restore

If required to return the system's configuration to what it was prior to Resetting the device, first click the
Select File button to select the backup file from the browser's default download folder [or another location if
you have moved it].
When a valid backup file has been selected, the Update button will appear.
Click the Update button to reapply the previously defined user settings.
CF40MESH Wi-Fi 6 Gateway– User Guide
UG01438 v1.00 December 2022
Figure 54 - Management – System – Reboot and Reset page
Figure 55 - Management – System –Backup and Restore page
45 of 56