Routing - Casa Systems NetComm CF40MESH User Manual

To enable this service, select Advanced Setup from the menu on the left, then choose UPnP from the
submenu.
Important – UPnP is activated only when there is a live WAN service with NAT enabled.
To enable a UPnP, select the
Details of UPnP port mapping appear in the data table.

Routing

To access this page, select Advanced Setup from the menu on the left, then choose Routing from the
submenu.
This table provides configuration details of all Static Routes. A maximum of 32 routes can be specified.
CF40MESH Wi-Fi 6 Gateway– User Guide
UG01438 v1.00 December 2022
Figure 38 - Advanced Setup – UPnP
Enable button.
Figure 39 - Advanced Setup – Static Route Rule list
34 of 56