Fujitsu TWAIN 32 Manual page 39

8. The [Update Device Driver Wizard] dialog box is displayed. Select [Specify
the location of the driver (Advanced)] and click the [Next] button.
9. The following dialog box is displayed. Select [Display a list of all the drivers in
a specific location, so you can select the driver you want], and click the [Next]
button.
10. Insert the Installation CD titled "ScanPartner Installation CD" into the disk
drive. Here, the CD-ROM drive is temporarily labeled "D:" (If the current
operating environment uses a different label, replace the drive label
specifications below accordingly.)
If automatic start is defined, the start screen of setup is displayed. To stop
the setup operation, click the [Exit] button on this screen.
36