Fujitsu TWAIN 32 Manual page 19

6. The following screen is displayed. Deselect the [Floppy disk drives] and [CD-
ROM drive] check boxes and, instead, select the [Specify a location] check
box. Then, click the [Browse...] button.
7. In the dialog box that is displayed, select the following directory destination
on the
CD-ROM, and click the [OK] button.
D:\Driver2 (When the CD drive is setting in "D:")
8. Click the [Next] button, and confirm that the following screen is displayed.
Click the [Next] button again.
In some cases, the message "Please insert the disk labeled 'Windows
and then click OK." is displayed. If this [OK] button is clicked, the message "The file
'usbscan.sys' (or scsimap.sys) on the Windows
displayed. In this case, insert your Windows
[OK] button. A necessary file is installed.

98 CD-ROM cannot be found." may be

98 CD-ROM into the CD-ROM drive, click
16

98 CD-ROM',