Fujitsu TWAIN 32 Manual page 36

11. The following dialog box is displayed. Click the [Have Disk] button, and then
click the [Browse (R)]...] button.
12. In the dialog box that is displayed, select the following directory destination
on the CD-ROM, and click the [OK] button.
D:\Driver2 (When the CD drive is setting in "D:")
13. A list of different models is displayed. Select the appropriate device name,
and click the [Next] button.
Select the same device name as the name selected in procedure 6.
14. The following dialog box is displayed. Click the [Next] button. Installation
starts.
In some cases, the message "Please insert the disk labeled 'Windows
and then click OK." is displayed. If this [OK] button is clicked, the message "The file
'usbscan.sys' (or scsimap.sys) on the Windows
displayed. In this case, insert your Windows
[OK] button. A necessary file is installed.

98 CD-ROM cannot be found." may be

98 CD-ROM into the CD-ROM drive, click
33

98 CD-ROM',