Sending Faxes > Basic transmission procedure
Using redial
Redial is a function allowing you to dial the last entered number once again.
Use this when the receiving system does not respond when you have tried to send a fax. When you want to send the fax
to the same receiving system, select [Recall], and you can call the receiving system you dialed on the destination list.
1
2
Select [Recall].
Press the [Start] key.
The transmission will start.
NOTE
Recall information is canceled in the following conditions.
•
When you turn the power off
•
When you send a next fax (new recall information is registered)
•
When you log out
3-6