PROAIM Kite-22 Assembly Instructions Manual page 9


Attach the provided bolt, shaft collars,
washers and nut. Tighten all the Allen bolts
and nuts to secure properly as shown in the
image.

Connect the one end of Head Platform
Levelling cable with the head platform by
hooking the turnbuckle ends.

And other end attach with the hub assembly.
Rear Frame Setup

To mount Rear section, of jib section and
insert the bolt with washers through one end
of the section to other. Slide the bolt
through and hand tighten
NOTE: Install the pan tilts head
Adding Weights Setup

Add weights (Not Included)
weight section at both sides and tighten the
weight closer knobs to secure properly.
(Not included).
to the rear
9