PROAIM Kite-22 Assembly Instructions Manual page 6


Once all the above mentioned steps are
completed, you will see the stand and
spreader as shown here.
Dolly Setup
NOTE: This dolly has various holes for flexible mounting of Tripod.

To open the legs of Dolly remove the bolts &
fully spread it on floor.

Then insert the bolts with their washer and
tighten the bolts properly.
NOTE: To keep the dolly in static position, lock
the wheels by pushing down the lever.

Remove the allen bolts from tripod holders.

Match the hole of Tripod holder with dolly to
insert the long bolt & tighten it with the help
of allen key.
6