Keysight Technologies N5251A Series Manual page 43

PNA Series Microwave Network Analyzer System N5251A
Table 4-1 Typical System Specifications (Continued)
40 GHz to 45 GHz
45 GHz to 50 GHz
50 GHz to 60 GHz
60 GHz to 67 GHz
67 GHz to 70 GHz
70 GHz to 75 GHz
75 GHz to 80 GHz
80 GHz to 100 GHz
100 GHz to 110 GHz
System Dynamic Range (dB)
10 MHz to 45 MHz
45 MHz to 500 MHz
500 MHz to 2 GHz
2 GHz to 10 GHz
10 GHz to 24 GHz
24 GHz to 30 GHz
30 GHz to 40 GHz
40 GHz to 45 GHz
45 GHz to 50 GHz
50 GHz to 60 GHz
60 GHz to 67 GHz
67 GHz to 70 GHz
70 GHz to 75 GHz
75 GHz to 80 GHz
80 GHz to 100 GHz
100 GHz to 110 GHz
Test Port Damage Level (dBm)
10 MHz to 110 GHz
a.
Assumes a 30 inch cable from the PNA 1.85 mm Test Port Out is used to provide the 10 MHz to
67 GHz source signal. The standard configuration does not have a bias-tee in the 1.0 mm test head
and uses this connection.
b.
Assumes a 30 inch cable from the PNA Source Out bulkhead connector is used to provide the 10
MHz to 67 GHz source signal. The Option 017 and 018 configurations includes a bias-tee in the 1.0
mm test head and use this connection.
Installation and Service Guide N5251-90001
–99
–97
–97
–92
–77
–81
–91
–94
–95
1.0 mm
Test Port
+63
+94
+120
+116
+111
+100
+92
+84
+85
+80
+75
+68
+74
+85
+89
+87
1.0 mm
Test Port
+27
System Specifications
–106
–104
–104
–103
–84
–87
–97
–100
–100
1.85 mm
PNA Port Waveguide Port
+65
+97
+123
+123
+121
+112
+107
+101
+103
+100
+95
+82
+87
+98
+101
+98
1.85 mm
PNA Port Waveguide Port
+27 +27
Specifications
4-3