Futech MULTICROSS 8 HIGH PRECISION RED User Manual page 6

If the workplace has a high brightness, for
example when working outside in a sunny area,
you will need a laser receiver to detect the laser
beam. (see further)
AUTO LEVELLING
After turning on the device or when you turn off
the slope mode, self levelling will automatically
place the laserlines 100% levelled.
While levelling, the indicator LED Y-axis [F] flash-
es green.
When levelling is finished, and the laser lines are
100% levelled, the indicator LED Y-axis [F] will be
green.


The laser can level itself in a range of approx. 3,5°
in every direction. This means the laser can show
100% horizontal or vertical lines when placed on
a sloped surface of approx. 3,5° maximum.
6
In case the laser is placed on a surface that
exceeds the 3,5°, a levelled horizontal or vertical
laser line will no longer be possible.
The indicator LED Y-axis [F] and the laser lines
will start flashing.

 
Place the laser device on a flatter surface, within
< 3,5°
the levelling range of 3,5° or turn the adjusta-
ble feet [08] to bring the device within the 3.5°
levelling range if possible. The laser will self level
automatically when placed within its levelling
range.


> 3,5°
> 3,5°