Pnp Receiver Selection And Installation - Horizon Hobby E-Flite EFL089500 Instruction Manual

EN

PNP Receiver Selection and Installation

The recommended receiver for this aircraft is the Spektrum AR631. If you choose to
install a different receiver, ensure that it is at least a 6-channel full range receiver.
Refer to the manual of your chosen receiver for correct installation and operation
instructions.
AR631 Installation
1. Remove the hatch by pulling up on the back of the hatch to expose the receiver
compartment.
2. Connect the control surface servos to the their respective ports on the receiver
using the table at the right.
3. Using double-sided servo tape (not included) mount the receiver to the flat area
of the receiver compartment, as shown. The receiver (A) should be mounted
in the orientation shown, parallel to the length of the fuselage, with the label
facing up and the servo ports towards the front of the aircraft. The orientation
of the receiver is critical for all AS3X
CAUTION: Incorrect installation of the receiver could cause a crash.
8
and SAFE technology setups.
® ®
AR631 Port
Assignments
BND/PRG = SRXL2
1 = Throttle
2 = Aileron
3 = Elevator
4 = Rudder
5 = GEAR
6 = Flaps
A
P-51D Mustang 1.2m