EN
Model Assembly
Horizontal Stabilizer Installation
1. Slide the horizontal stabilizer tube (A) into the hole in the rear of the fuselage.
2. Install the 2 piece (left and right) horizontal stabilizer as shown. Ensure the
control horn faces down.
3. Secure the two horizontal stabilizer pieces in place using the 2 included M2mm x
10mm countersunk self-tapping screws (B). (Use a #0 phillips screwsdriver)
4. Attach the clevis to the elevator control horn
(see instructions for clevis connection).
Disassemble in reverse order.
4
B
M2 x 10mm
Countersunk
Self-tapping
Elevator Control Horn
Retaining Tube
Pushrod
Clevis
P-51D Mustang 1.2m
A