As3X Response Test - Horizon Hobby E-Flite EFL089500 Instruction Manual

AS3X Response Test

This test ensures that the AS3X ® control system is functioning properly. Assemble
the aircraft and bind your transmitter to the receiver before performing this test.
1. Raise the throttle just above 25%, then lower the throttle to activate AS3X.
CAUTION: Keep all body parts, hair and loose clothing away from a
moving propeller, as these items could become entangled.
2. Move the entire aircraft as shown and ensure the control surfaces move in
the direction indicated in the graphic. If the control surfaces do not respond
as shown, do not fly the aircraft. Refer to the receiver manual for more
information.
Once the AS3X system is active, control surfaces may move rapidly. This is normal.
AS3X remains active until the battery is disconnected.
Due to different effects of torque, lift, and drag some aircraft require trim changes
with different speeds and throttle settings. Mixes are preloaded into the receiver to
compensate for these changes. The mixes become active the first time the throttle
is raised above 25%. The control surfaces may be offset slightly at different throttle
settings after the first time throttle is raised. Trimming the plane in flight should be
done at 80-100% throttle for best results.
Aircraft movement
EN
AS3X Reaction
13