Noraxon Ultium EMG Quick Start Manual page 4

Ultium EMG Quick Start Guide
3 Installing the Companion Software - myoRESEARCH™ 3
To utilize the full functionality of the Ultium EMG system, and ensure the system has updated drivers, Noraxon's
myoResearch 3 (MR3) needs to be installed on the computer.
Note: The Ultium Receiver requires the Noraxon USB device driver which is pre-installed by the MR3 software installation. It
is also available in the Downloads Section
3.1 Software Installation
Within the Ultium Motion System shipment, there is a USB flash drive containing the latest myoRESEARCH 3 software.
1. Insert the MR3 USB flash drive into the PC
2. Open the installer application (e.g., noraxon.mr.3.18.00) and follow the instructions
3. After installation, an icon will be created on the desktop
3.2 Companion Software Activation
The companion software must be activated before unrestricted use is possible.
1. Open MR3
2. A dialog box will indicate how many more times MR3 can be opened
3. Click "Activate"
4. Enter the License ID provided on your USB flash drive and press "OK"
5. If you have an internet connection, click Activate by Internet for
immediate activation.
6. Alternatively, email the provided activation ID to
activation@Noraxon.com.
7. Noraxon Support will email or respond by phone with the Activation
Code.
8. Enter the provided Activation Code to remove any restrictions on use.
(Rev B)
of the Noraxon website.
4