Norton Clipper Blockbuster BBC347 Owner's Manual page 21

2. Check Fuel: Fill if low. Use only unleaded gasoline with a pump sticker octane rating of 86
or higher is recommended. Never use an oil and gasoline mixture!
3. Air Cleaner: Never run the engine without the air cleaner! Rapid engine wear will result
from contaminants being drawn through the carburetor and into the engine.
4. Engine Starting: Refer to the engine owner's manual for proper engine starting procedure.
Make sure that the Cutting Head Depth Limiting Bolt
Assembly is in the bottom position. The head on the Gasoline
Powered Saw should only rise to a maximum of nine (9) inches
above the surface of the Cutting Table
For any Engine service, warranty, or technical related questions please contact your nearest
Honda service centers:
Honda Power Equipment Group
4900 Marconi Dr.
Alpharetta, GA 30005-8847
Tel: (800) 426-7701 | Fax: (678) 339-2670
Web page: http://www.honda-engines.com/dis.htm
21