Set-Up, Connection And Initial Start-Up; Choosing A Suitable Location; Positioning - Hanseatic HG4585D107636QW User Manual

Page EN-30

Set-up, connection and initial start-up

Set-up, connection and initial start-up

Choosing a suitable location

CAUTION!
Risk of injury!
The appliance is heavy and bulky.
Improper handling of the appliance
may lead to injuries.
Seek the help of another person during
■
transport, installation and assembly.
If a trolley is used to move the appli-
■
ance, the appliance must be moved
as shown on the packaging.
Only lift the appliance as shown on
■
the packaging.
Remove all obstacles on the transport
■
route and from the installation loca-
tion, e.g. open doors and clear away
objects lying on the fl oor.
The planned location must fulfil the following
prerequisites:
– The location must be a dry and frost-safe
room with a firm ground.
– In order to install the connection pipes,
the dishwasher must be positioned near to
a washing/dishwashing basin or the floor
drain.

Positioning

You can position the dishwasher in two ways:
– as a freestanding appliance in the room.
The space requirement corresponds to the
aforementioned appliance dimensions.
– built under a worktop. In this case,
you must take the required recess dimen-
sions into consideration.
• Remove cardboard, polystyrene and ad-
hesive strips from the inside of the dish-
washer, if you have not already done so.
Freestanding
Appliance measurements
44.8 cm
1. Place the dishwasher in the desired
position.
2. In order to compensate for uneven floor
surfaces and set up the dishwasher on a
level horizontal base, you can screw the
four adjustable feet (32) in or out.
The adjustable feet have slots around
their circumference. Insert a screwdriver
and turn the adjustable foot.
Use a spirit level to set up the dishwasher.
84.5 cm
60.0 cm
(32)