Set-Up, Connection And Initial Start-Up; Choosing A Suitable Location; Positioning - Hanseatic HG4585D107610HW User Manual

Page EN-28

Set-up, connection and initial start-up

Set-up, connection and initial start-up

Choosing a suitable location

CAUTION!
Risk of injury!
The appliance is heavy and bulky. Im-
proper handling of the appliance may
lead to injuries.
■ Seek the help of another person dur-
ing transport, installation and assem-
bly.
■ If a trolley is used to transport the ap-
pliance, the appliance must be moved
as shown on the packaging.
■ Only lift the appliance as shown on
the packaging.
■ Remove all obstacles on the transport
route and from the installation loca-
tion. Close doors and clear away ob-
jects lying on the fl oor.
The planned location must fulfil the following
prerequisites:
– The location must be a dry and frost-safe
room with a firm ground.
– In order to install the connection pipes, the
dishwasher must be positioned near to a
washing/dishwashing basin or the floor
drain.

Positioning

You can position the dishwasher in two ways:
– as a freestanding appliance in the room.
The space required for this corresponds to
the appliance measurements cited in the
following diagram.
– built under a worktop. In this case, you
must take the required recess dimensions
into consideration.
Continue with "Connecting the outlet hose".
Appliance measurements
448 mm
1. Remove cardboard, polystyrene and ad-
hesive strips from the inside of the dish-
washer, if you have not already done so.
2. Place the dishwasher in the desired posi-
tion.
3. In order to compensate for uneven floor
surfaces and set up the dishwasher on
a level horizontal base, you can screw
the four adjustable feet (25) in or out. The
adjustable feet have slots around their cir-
cumference. Insert a screwdriver and turn
the adjustable foot.
Use a spirit level to set up the dishwasher.
845 mm
600 mm
(25)