Page 1
SM25 Pulley Station Add On USER MANUAL Product may vary slightly from the item pictured due to model upgrades. Read all instructions carefully before using this product. Retain this owner’s manual for future reference. NOTE: This manual may be subject to updates or changes. Up to date manuals are available through our...
I. IMPORTANT SAFETY INSTRUCTIONS WARNING: Read all instructions before using this machine. To ensure your safety, read the following precautions before using this product 1. Please read, study and understand the instructions and all warning labels before use. (It is recommended to be familiar with the normal operation and use methods of the device before using this product.
II. CARE INSTRUCTIONS • Lubricate moving joints with silicon spray after periods of usage. • Be careful not to damage plastic or metal parts of the machine with heavy or sharp objects. • The machine can be kept clean by wiping it down using dry cloth. •...
IV. ASSEMBLY INSTRUCTIONS IMPORTANT: 1. The washer should be placed at both ends of the bolt (anti-bolt head and nut), unless otherwise specified. 2. During the preliminary assembly tighten all bolts and nuts by hand, and then tighten with wrench for complete assembly. 3.
Page 8
STEP 2 1. Install (#3) onto (#A) according to the diagram, and secure with flat spacer (#38) and nut (#40). 2. Place (#8) onto (#3) and fix with bolts (#35) and flat spacers (#39). 3. Place (#26) on (#3) as shown in the figure, and secure with bolts (#31), flat spacer (#38) and nut (#40).
Page 9
STEP 3 1. According to the diagram, place (#13) and (#14) to the front of (#3), and (#24) at the back, then tighten with bolts (#31), flat spacer (#38) and nuts (#40). 2. According to the diagram, place (#12) on both sides of (#14) and pass through (#23) and tighten it with the flat gasket (#37) and nut (#40).
Page 10
STEP 4 NOTE: Be sure to install the wire rope before installing the pulley. | ASSEMBLY INSTRUCTIONS...
V. EXERCISE GUIDE PLEASE NOTE: Before beginning any exercise program, consult your physician. This is important especially if you are over the age of 45 or individuals with pre-existing health problems. The pulse sensors are not medical devices. Various factors, including the user’s movement, may affect the accuracy of heart rate readings.
VI. MAINTENANCE MAINTENANCE METHOD: To extend the service life of the device, the parts must be lubricated on time. The product has been initially lubricated before leaving the factory, but lubrication is required between the guide rod and the weight plate over time. NOTE: Silicon oil/spray is recommended for lubrication.
VII. WARRANTY AUSTRALIAN CONSUMER LAW Many of our products come with a guarantee or warranty from the manufacturer. In addition, they come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage.
Need help?
Do you have a question about the SM25 and is the answer not in the manual?
Questions and answers