Exporting Data - Huawei UPS5000-H-600 kVA-FT User Manual

UPS5000-H-600 kVA-FT
User Manual (PowerPOD, 100 kVA Power Module)
Step 3 View active alarms and check that the EPO alarm is cleared. If the system bypass
input is normal, the UPS transfers to bypass mode.
●
●
Step 4 Start the inverter.
----End

7.9 Exporting Data

Prerequisites
To export data from the WebUI, you need to log in to the WebUI.
Context
The following information can be exported: historical alarms, active alarms,
performance data, operation logs, e-labels, and fault information.
LCD
Insert a USB flash drive into the USB port on the monitoring module. On the LCD,
choose System Status > Maintenance > USB Operations > Fault Data and
download the required data.
Figure 7-25 Exporting data
WebUI
●
Issue 01 (2022-05-12)
On the LCD
Choose System Info > Alarms > Active Alarms to check that the EPO alarm
has been cleared.
On the WebUI
Choose Home > Active Alarm to check that the EPO alarm has been cleared.
Exporting fault information
Choose Maintenance > Fault Information, set Encryption password for
export, click Export Fault Information, and specify a path to save the
exported data.
Copyright © Huawei Technologies Co., Ltd.
7 System Commissioning
86