Table of Contents
Advertisement
UPS5000-H-600 kVA-FT
User Manual (PowerPOD, 100 kVA Power Module)
●
●
●
●
●
●
●
●
●
Issue 01 (2022-05-12)
All cable holes should be sealed. Seal the used cable holes with firestop putty.
Seal the unused cable holes with the caps delivered with the cabinet. The
following figure shows the criteria for correct sealing with firestop putty.
Do not scrawl, damage, or block any warning label on the equipment.
When installing the equipment, use a torque wrench with a proper range to
tighten the screws. When using a wrench to tighten the screws, ensure that
the wrench does not tilt and the torque error does not exceed 10% of the
specified value.
Do not work with power on during installation.
Repaint any paint scratches caused during equipment transportation or
installation in a timely manner. Equipment with scratches cannot be exposed
to an outdoor environment for an extended period of time.
Before operations, ensure that the equipment is firmly secured to the floor or
other solid objects, such as a wall or an installation rack.
Do not use water to clean electrical components inside or outside of a
cabinet.
Do not change the structure or installation sequence of equipment without
permission.
Do not touch a running fan with your fingers, components, screws, tools, or
boards before the fan is powered off or stops running.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Information
3
Advertisement
Table of Contents
