Table of Contents
Advertisement
INSTALLING THE DISTRIBUTION PLATE
DISTRIBUTION
PLATE
BOTTOM SHIELD
M4 x 5 DIN7984
SCREW
STEP 1
SIDE RADIATOR
WITH FANS
Carefully insert the distribution plate into the PC Chassis. The bottom
shield can also be removed before placing the distribution plate.
STEP 1
STEP 2
Secure the distribution plate from the backside with six (6) M4 x 5
DIN7984 Screws and Allen Key 2.5 mm.
For this step you will need:
STEP 2
- 8 -
Before installing the distribution plate into the PC Chassis,
it is recommended to install the side radiator with fans.
Otherwise, placing the distribution plate into the final
position is harder.
Allen Key 2.5 mm (1 pc)
M4x5 DIN7984 Screw (6 pcs)
Advertisement
Table of Contents
Need help?
Do you have a question about the Reflection2 ROG Hyperion D5 PWM D-RGB and is the answer not in the manual?
Questions and answers