General Maintenance, Cleaning - Agria 3600 925 Operating Instructions Manual

5. Maintenance and Repair
General Maintenance
parts with Bio-lubricating grease or Bio-
lubricating oil (e.g. speed hand lever,
handle bearing etc.).
Cleaning
Cutter Bar
cleaning, apply Bio-lubricating oil or
Bio-lubricating grease to all gliding
parts.
Fit knife guard!
Implement Carrier agria 3600 BM Unihamster
 Watch out for
fuel and oil leak-
age every time
you take up oper-
ation, repair if
necessary.
 Regularly check
bolts and nuts for
tight fit, retight-
en, if necessary.
 At least once a
year and after
cleaning:
Lubricate all glid-
ing and moving
After each mow-
ing, clean cutter
bar thoroughly
with water. Re-
move the knife
and remove dirt
collected be-
tween knife
blades. After
Mowing Drive and Machine
   

I
chine and operate mowing drive for a
short time to press out penetrated wa-
ter. Apply grease generously to leave a
grease neck around bearing to prevent
water, plant sap and dirt from penetrat-
ing.
Engine
After cleaning with
a i r - c o m p r e s s e d
water jets immedi-
ately lubricate die
pivot arm bearing
on the moving
drive lubrication
points on the ma-
Clean engine only
with a cloth. Avoid
spraying with wa-
ter, as water might
penetrate into igni-
tion and fuel sys-
tem and cause
malfunctions.
45
5