Table of Contents
Advertisement
4. Commissioning and Operation
2.
1.
4
4 4
32
Mowing or Working
Remove knife guard (only with cutter bar).
Grease the cutter bar (only with cutter bar).
Start the engine.
Comissioning
W
Check safety circuit function, see page 40
- Only operate the machine if safety circuit
works!
Wear individual protective ear plugs and solid shoes.
Engage proper gear 1 or 2.
Move PTO lever.
Release the brake - only premium version.
Press the safety lever slightly while stepping on the
gas.
Direction change from forward to reverse:
Engine to idle speed.
Release the safety lever.
Move the shifter to "R".
Press the safety lever slightly while stepping on the
gas.
In particular when reversing or manoeuvring,
watch out for obstacles to prevent surprises!
Re-tighten all nuts and screws of the mowing drive and the
cutter bar after commissioning and when changing the
knife after about 15 - 30 operating minutes and than
every 4 operating hours (particularly of
the cutter bar carrier and the knife driver).
Implement Carrier agria 3600 BM Unihamster
Advertisement
Table of Contents
