Table of Contents
Advertisement
4. Commissioning and Operation
0
Implement Carrier agria 3600 BM Unihamster
Caution with hot engine parts!
The exhaust and other engine parts become very
hot, if the engine runs and immediately after turning
off. Hold for sufficient distance from hot surfaces
and keep children away from the running engine.
I
After mowing or in case of clog-
ging:
comes to a stop but not the knives, thus free-
0
ing the cutter bar from grass.
Never leave the machine unattended while
the engine is running.
Cutter bar gliding skids
The cutter bar is equipped with height-adjust-
able running bases (or optional)to avoid any
damage on the knife (stones etc.).
Height adjustment:
Loosen hexagonal nuts (1).
Slightly lift cutter bar and adjust the slid-
ing skids (2).
Re-tighten hexagonal nuts (1).
I
Disengage wheel-drive. The mower
Release the safety lever.
Disengage mowing drive.
Shut engine off.
Re-fit knife guard.
If cleaning becomes neces-
sary during operation, the en-
gine must be shut off and the
spark plug connector discon-
nected for safety reasons.
Adjust all sliding skids to the
4
33
Advertisement
Table of Contents
