3. Devices and Operating Elements
Universal cutter bar
3
Municipal cutter bar
Finger cutter bar
24
Implement Carrier agria 3600 BM Unihamster
Attaching the Cutter Bar
W
Wear safety gloves!
Fit the knife guard!
Loosen the clamping bolt (17)
1/2
on the knife driver and undo the
bolts on the driver by approx. two
turns (18).
Fit the cutter bar with the knife
driver (16) into the pivot arm (13).
2
Bolt the cutter bar to the carrier
(12), tighten them evenly and lock
with nuts (6).
Adjust the knife driver.
3
Check all attachment bolts for
tight fit!
Removing the cutter bar
Reverse the above order.
Exchanging Mowing Knifes
Turn off the engine, remove
the spark plug connector!
Wear safety gloves!
Fit knife guard before you re-
move mowing knife!
Keep clear off mowing knife!
Mounting and Dismounting
43
operating instructions
cutter bar