General Maintenance; Cleaning - Agria 2100 Operating Instructions Manual

5. Maintenance
5
36
I
Single-wheel power hoe 2100

General Maintenance

Watch out for fuel and oil leakage
before each operation and repair, if nec-
essary.
Regularly tighten screws and nuts.
Once a year and after cleaning
slightly grease all gliding and moving
parts (e.g. speed control lever, hand le-
ver bearing, etc.) with bio-lubricating
grease and bio-lubrication oil.

Cleaning

Engine
Clean engine only with a cloth. Avoid
spraying with air-compressed water jets,
as water might leak into ignition and fuel
system causing malfunctions.
Machine
After each operation immediately clean
the tilling tools and the protective hood
thoroughly with water.Therefore dis-
mount the protective hood. Grease all
gliding parts with Bio-lubricating grease
and Bio-slushing oil.
After cleaning the machine with a pres-
sure washer immediately lubricate all
lubrication points and shortly operate the
machine to press the water out.
Apply grease generously to leave a
grease ring around bearings to prevent
water, plant sap, and dirt from penetrat-
ing.