Page 2
Except as expressly written by LYNX Technik AG, the furnishing of this document does not give you any license to patents, trademarks, copyrights or other intellectual property of LYNX Technik AG or any of its affiliates.
LYNX Technik, with shipping charges prepaid. LYNX Technik shall pay for the return of the product to the customer if the shipment is within the country which the LYNX Technik service center is located.
Reference Manual C DA 3000 Version 2.0 Regulatory information Europe Declaration of Conformity LYNX Technik AG Brunnenweg 3 D-64331 Weiterstadt Germany Declare under our sole responsibility that the product TYPE: C DA 3000 To which this declaration relates is in conformity with the following...
Reference Manual C DA 3000 Version 2.0 Getting Started Packaging The shipping carton and packaging materials provide protection for the module during transit. Please retain the shipping cartons in case subsequent shipping of the product becomes necessary. Product Description The C DA 3000 is a high quality 8 bit video digital to analog converter designed primarily for broadcast and professional applications.
Page 8
10 MiniModules can be mounted utilizing the optional LYNX R FR 3005 / 3010 rack housing. This includes integrated power supply and optional remote control interfaces.
Reference Manual C DA 3000 Version 2.0 Functional Diagram Figure 1 below is the basic functional diagram for the C DA 3000 MiniModule. SDI LOOP 1 SDI LOOP 2 G or Y SDI IN B / U / Y (S) R / V / C (S) Color Bars...
Page 10
Reference Manual C DA 3000 Version 2.0 Figure 2 – Module Layout Page 10...
Reference Manual C DA 3000 Version 2.0 Connections Video Connections The C DA 3000 MiniModule is configured with standard 75 Ohm BNC connectors. Connection is self-explanatory. We recommend the use of high quality video cable suitable for digital video connections to reduce the risk of interference or errors due to excessive cable attenuation.
Data Connection Power Connection i2C-SDA (data) + 5V i2C-SCL (clock) Male Connector (view looking into connector from front) Caution Only use the optional LYNX R PS power modules. Ensure the 5-pin power connector is locked securely in place. Page 12...
Reference Manual C DA 3000 Version 2.0 Installation Mechanical Stand Alone Operation The C DA 3000 MiniModule can be used in a stand alone application. There are two options for the use of the module in this way. a) Using the R FR 3005 Rack Frame 1 option. This allows up to any 10 of the MiniModules to be secured onto a rack frame assembly for 19 inch rack mounting.
Reference Manual C DA 3000 Version 2.0 Multiple Units Most applications will require more than one MiniModule, which can include any of the available Series 3000 MiniModule product range. There are two options for mounting multiple units. a) Using the R FR 3005 Rack Frame option. This allows up to any 10 of the MiniModules to be secured onto a rack frame assembly for 19 inch rack mounting.
/ receiving the signals from the module or damage can result. Caution. Only use the optional LYNX R PS power modules. Ensure the 5-pin power connector is locked securely in place.
Reference Manual C DA 3000 Version 2.0 Multiple Units When installing multiple MiniModule units it is recommended you use the R FR 3005 Rack Frame 1 and / or R FR 3010 Rack Frame 2 options. Please refer to the documentation supplied with these options for details on electrical installation.
Reference Manual C DA 3000 Version 2.0 Switch Function Detail All settings are stored in Flash Ram inside the module (see Auto Store section in this manual). Settings will be recalled on power up. It is recommended that switch 1 is set to OFF to disable further local control when the module is configured for use.
Reference Manual C DA 3000 Version 2.0 Dip Switch 6 Selects the output mode for the test signal. ON for NTSC, OFF for PAL Dip Switch 7 Selects the output signal if no input signal is present. ON selects signal BLACK, OFF selects signal COLOR BARS Factory Preset Condition The C DA 3000 is delivered preset for the following...
Reference Manual C DA 3000 Version 2.0 Alarm/LED Status Indicators The C DA 3000 module has built in LED indicators, which serve as alarm and status indication for the module. Function is described below. The Indicators are found on the bottom of the module and can be seen through the access holes provided (Fig.
Reference Manual C DA 3000 Version 2.0 Locate Function For large systems which have many modules in various locations we have added a utility which will help visually identify a module quickly. (When used in conjunction with the optional control system and software) Once the module has been identified on the control system it is possible to initiate the “locate”...
Reference Manual C DA 3000 Version 2.0 Available Options Below is a list of available options for the C DA 3000 MiniModule. Please refer to product brochures or our web site for more detailed information. Model Description External brick power supply module for Series 3000 R PS 3001 E MiniModules.
Please contact your distributor or check our web site for details on this program. More detailed information and product updates may be available on our web site: www.lynx-technik.com You will also find links to contact us directly for assistance. Page 23...
Reference Manual C DA 3000 Version 2.0 Contact Information Please contact your local distributor; this is your local and fastest method for obtaining support and sales information. LYNX Technik can be contacted directly using the information below. Address LYNX Technik AG Brunnenweg 3 64331 Weiterstadt Germany.
Page 25
Reference Manual C DA 3000 Version 2.0 Notes Page 25...