Locate Function; Auto Store - Lynx MiniModules 3000 Series Reference Manual

Reference Manual C DA 3000 Version 2.0

Locate Function

For large systems which have many modules in
various locations we have added a utility which will
help visually identify a module quickly. (When used
in conjunction with the optional control system and
software)
Once the module has been identified on the
control system it is possible to initiate the "locate"
function and flash the module LEDs yellow in the
following continuous sequence.
3 short flashes.... Pause.... 3 short flashes ...
This uses the alarm LED located on the front of the
module as well as any module edge LEDs that may
be used in the module.
Use of the locate function will not interfere with the
normal operation of the module.
For more details on this feature please check the
documentation supplied with the controller
software

Auto Store

If no parameters are changed for 10 seconds then
the current settings will be written into flash memory
automatically, this can be seen by the front LED
flashing yellow four times.
Page 20