Electrical Installation; Stand Alone Operation - Lynx MiniModules 3000 Series Reference Manual

Electrical Installation.

Stand Alone Operation

The MiniModule requires the R PS 3001 power brick
option for stand-alone operation. Four versions are
available: R PS 3001 E for European markets, R PS
3001 U for the US markets, the R PS 3003-3 desk
power supply or the R PS 3004 desk power supply
for four MiniModules. Please ensure you have the
correct power option for your region. The
connection to the module is made with a small 5-
pin connector, which has a twist bayonet securing
system. Please make sure the connection is solid
and locked in place. A strain relief is included within
the module to prevent excessive strain on the
connection.
Signal connections should be made with care,
please ensure connections are correct and
compatible equipment is feeding / receiving the
signals from the module or damage can result.
!
Caution. Only use the optional LYNX R PS
power modules. Ensure the 5-pin power
connector is locked securely in place.
Caution. Care needs to be taken when
using the module in this way, if it is not
!
physically secured. Keep the module
away from the floor to avoid the risk of
someone stepping or tripping on the unit,
and locate the unit away from excessive
sources of heat and any sources or
moisture.
Reference Manual C DA 3000 Version 2.0
Page 15