Aaeon MIX-H310D2 Manual page 37

The following items appear only when you set Fan Control Mode to [Smart Fan
IV Mode].
Temperature 1 [40] / Temperature 2 [50] / Temperature 3 [60] /
Temperature 4 [70]
Sets the temperature value for the Smart Fan IV mode.
Fan PWM 1 [150] / Fan PWM 2 [170] / Fan PWM 3 [200] / Fan PWM 4 [220]
Sets the Fan PWM value for the Smart Fan IV mode.
Tolerance of Temperature [0]
Input value range: [0~7]
Critical Temperature [75]
Input value range: [0~255]
Critical Temp Tolerance [0]
Input value range: [0~7]
Fan Count Step Up [1]
Input value range: [0~15]
Fan Count Step Down [1]
Input value range: [0~15]
Fan Out Step Up Time [10]
Sets the amount of time Fan Out takes to increase its value by one step.
Input value range: [0~255]
Fan Out Step Down Time [10]
Sets the amount of time Fan Out takes to decrease its value by one step in
intervals of 0.1 seconds. Input value range: [0~255]
The following item appears only when you set Fan Control Mode to [Manual
Mode].
PWM/DC Voltage Output [255]
Sets the voltage allocated for Fan Control. Input value range: [0~255]
The following items appear only when you set Fan Control Mode to [Thermal
Cruise Mode].
Target Temperature [50]
Input value range: [0~127]
Tolerance of Temperature [0]
Input value range: [0~7]
Fan Out Start-Up Value [127]
Input value range: [0~255]
Chapter 3: BIOS setup
3-5