Table of Contents
Advertisement
Assembling
5.2 Types of installation
NOTICE
Warming and premature aging of the IE switch due to direct sunlight
Direct sunlight can heat up the device and can lead to premature aging of the IE switch and
its cabling.
Provide suitable shade to protect the IE switch against direct sunlight.
Note
During installation and operation, keep to the installation guidelines and safety notices
described in this document and in the system manuals "Industrial Ethernet / PROFINET
Industrial Ethernet" and "Industrial Ethernet / PROFINET passive network components".
You will find information on the system manuals in the section "Introduction (Page 5)", in
"Further documentation".
5.2
Types of installation
Mounting the IE switches
For the devices, you have the following options:
● 19" rack mounting
● Desktop operation with adhesive feet
● Secured at 4 points using special mounting brackets
Mounting modular components
For the modular components, you have the following options:
● Plugging/pulling media modules in the module slots
● Inserting/removing SFP transceivers in media modules for SFP or SFP+ slots
● Inserting/removing SFP+ transceivers in SFP+ slots
● Mounting power supply units
42
Operating Instructions, 09/2018, A5E03275845-12
SCALANCE XR-500
Advertisement
Table of Contents
